DeeZee DZ 4469JL Installation Instructions Manual

Jl rear door workbench jeep wrangler jl 2019-current

1-800-779-2102

Mon – Thurs: 8:00am - 5:00pm | Friday: 8:00am - 4:00pm CST

INSPECT YOUR PRODUCT FOR DAMAGE & MISSING

PARTS BEFORE PROCEEDING TO INSTALLATION

PROCEDURE FOR RETURNS OR MISSING HARDWARE

-PLEASE CONTACT THE ORIGINAL POINT OF PURCHASE FOR:

SHIPPING DAMAGE, RETURNS, OR WARRANTY CLAIMS

-CONTACT DEE ZEE DIRECTLY FOR MISSING PARTS OR HARDWARE

WWW.DEEZEE.COM

VIEW INSTRUCTIONS ONLINE: www.deezee.com/instructions

Operating, servicing, and maintaining a passenger vehicle can expose you to chemicals such as lead,

phthalates, engine exhaust, and carbon monoxide that are known to the State of California cause cancer

and birth defects or other reproductive harm. To minimize exposure, service your vehicle and its

accessories in a well-vented area and wear gloves or wash your hands frequently.

Table of Contents

Need help?

Do you have a question about the DZ 4469JL and is the answer not in the manual?

Page 1 SHIPPING DAMAGE, RETURNS, OR WARRANTY CLAIMS -CONTACT DEE ZEE DIRECTLY FOR MISSING PARTS OR HARDWARE WWW.DEEZEE.COM REGISTER YOUR PRODUCT ONLINE: www.deezee.com/registration VIEW INSTRUCTIONS ONLINE: www.deezee.com/instructions Operating, servicing, and maintaining a passenger vehicle can expose you to chemicals such as lead, phthalates, engine exhaust, and carbon monoxide that are known to the State of California cause cancer and birth defects or other reproductive harm.
Page 2 JL Rear Door Workbench Installation Instructions DZ 4469JL Jeep Wrangler JL 2019-Current 1 1/4" Spacer M6 X 50mm Button Head Bolt Rear Door Workbench PN 1324 PN 1284 JLWB001ASSM 3M Double Sided Tape M6 Washer TAPE-25 PN 645B Required tools...
Page 3 Remove top cover on rear door by prying it off using a screwdriver. Use 1/2" drill bit to drill holes using guides in the locations shown below. Page 2 of 4 DZ 4469JL 08/19/2019...
Page 4 Reinstall plastic to cover and install spacers (B) into the holes drilled from the previous step. Place tape from step 1 onto the lower area on the rear of the brackets as shown. Page 3 of 4 DZ 4469JL 08/19/2019...
Page 5 Fully tighten hardware at this time. Peel off the rest of the double sided tape cover and press against the rear door. Tighten or loosen any hardware to desired tension of hinge and latches. Page 4 of 4 DZ 4469JL 08/19/2019...
Page 6 Page 5 of 4 DZ 4469JL 08/19/2019...