Table of Contents
Advertisement
VI: Turn On/Off the UPS
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit by pressing the power switch again.
5. Functions & Operation
I: DC Start Function
DC Start Function enables the UPS to be started on battery when AC utility power is not available and the
battery is fully charged. Just press the power switch to turn on the UPS.
II: AVR (Automatic Voltage Regulation)
If the quality of the incoming mains is poor, the AVR boosts a low incoming voltage or reduces (bucks) a high
one. The load receives a voltage within a normal range.
III: Auto restart while AC recovery
When AC power recovers the UPS will power up and start charging the battery
IV: Audio Indicator
Audible Alarm
Sounding every 10 seconds
Sounding every 1 second
Sounding every 0.5 seconds
Continuous sounding
6. Software Installation on your PC
Connected by USB to a PC or notebook, the Software enables communication between the UPS and the
computer. The UPS software monitors the status of the UPS, shuts down the system before the UPS is
exhausted and can remotely observe the UPS via the Network (enabling users to manage their system more
effectively). Upon AC failure or UPS battery low, UPS takes all necessary actions without intervention from the
system administrator. In addition to automatic file saving and system shut-down functions, it can also send
warning messages via pager, e-mail etc.
Use the bundled CD and follow the on-screen instructions to install the software WinPower.
Enter the following serial No. to install software: 511C1-01220-0100-478DF2A
After the software is successfully installed, and communication with UPS has been established a green
icon will appear in the system tray.
Double-click the icon to use the monitoring software.
You can schedule UPS shutdown/start-up and monitor UPS status through PC.
Detail instructions please refer to the e-manual in the software.
Check
http://www.ups-software-download.com/index.htm
latest updates
version of monitoring software.
Situation
UPS on Battery Mode
Battery Low
UPS is in Overload
UPS is Faulty
from time to time to get the
Advertisement
Table of Contents
