Table of Contents
Advertisement
Quick Links
Assembly Instructions
Assembly Packing List
Screws M5
Screws M6
QTY: 20
QTY: 24
Door Pin
Top Cover
QTY: 1
Frame
Glass Door
QTY: 1
Exploded-View
Nut
QTY: 15
Bottom
QTY: 1
QTY: 1
Mounting Profile
QTY: 1
QTY: 4
Lock
L Wrench
QTY: 3
QTY: 1
Side Panel
QTY: 2
Mounting Rail
QTY: 4
Connecting Plates
QTY: 4
Rear Panel
QTY: 1
1/6
Advertisement
Table of Contents
Related Manuals for NetworX WMC-S110
Summary of Contents for NetworX WMC-S110
- Page 1 Assembly Instructions Assembly Packing List Screws M5 Screws M6 Lock L Wrench Connecting Plates QTY: 20 QTY: 15 QTY: 24 QTY: 3 QTY: 1 QTY: 4 Door Pin Top Cover Bottom Side Panel Rear Panel QTY: 1 QTY: 1 QTY: 1 QTY: 2 QTY: 1 Frame...
- Page 2 Assembly Instructions Step 1: Fix the back panel to the bottom panel To start, lay down the bottom panel and screw in the back panel using two M6 screws and nuts. Feed the screws through the bottom of the bottom panel and thread the nuts onto the screws through the in- side of the cabinet.
- Page 3 Assembly Instructions Step 3: Fix the top panel to the front and back panels Place the top panel on top of the front and back panels and secure using four M6 screws and nuts. Step 4: Attach connecting plates to all back corners Using the four connecting plates and eight M5 screws, secure the top and bottom panels to the back panel.
- Page 4 Assembly Instructions Step 5: Fix the mounting rails to the top and bottom Using the four mounting rails, eight M6 screws and nuts, mount the mounting rails to the cabinet. To do this, secure two mounting on the top panel and two mounting rails on the bottom panel, run- ning parallel to the side panels.
- Page 5 Assembly Instructions Step 7: Attach side panels Before attaching the side panels to the cabinet, the locks need to be added. First, put the lock through the hole on the side panel and secure with the nut. Then add the locking tab and screw it onto the lock.
- Page 6 Assembly Instructions Step 2: Secure Lock Step 1: Position lock The first step to adding a lock to the door Next, you’ll want to secure the lock to the and side panels is to position the lock in the surface using the provided nut. hole.
Need help?
Do you have a question about the WMC-S110 and is the answer not in the manual?
Questions and answers