Page 3
Remote Switch. Please read and understand this manual completely before installing and using the product. In this manual, the Gavita RS1 Remote Switch will be referred to as “the remote switch”. This is the original manual, keep it in a safe location!
Page 4
Introduction The Gavita RS1 Remote Switch is a manual light intensity controller. It can be used to switch, dim or boost one or multiple linked fixtures at once. For information on fixture setup and daisy chaining, please consult your fixture Manual.
Product specifications EAN Code 8718403054591 Part Number HGC990828 Dimensions 2.6” x 2.6” x 1.7” (67 x 67 x 44 mm) Weight 0.15 lbs (70 g) Inout connector RJ 6P6C...
Box Contents RS 1 Remote Switch RJ-RJ cable (10 ft / 3.0 m) Double-sided Tape (ca. 50 mm) Manual...
Page 7
Ports and control Ports and light intensity control are indicated on the front of the remote switch. 100% Boost 82.5% RS Input Gavita RS1 Remote Switch...
Installing the remote switch Remove the cover strips from the double sided tape, and stick the remote switch to a wall.
Page 9
Connect the first fixture to the RS Input port (A). The remote switch recieves power from the RS Input port. No additional power supply is required. To use your fixtures with the RS1 set the fixtures to EXT. 100% Boost 82.5%...
Page 10
(100%) for at least 100 hours to stabilize the lamp. Failing to do so may lead to sub-optimal light levels and premature end of life failure of your lamp. 100% Boost 82.5% RS Input Gavita RS1 Remote Switch...
100%. Rotate the knob to boost for extra light intensity. The percentage displayed on the RS1 is the percentage of the maximum power of the fixture. eg. 60% = 600 W for a 1000 W fixture / 450 W for a 750 W fixture.
Page 12
Manual: RS1 Remote Switch For more information, or to download documents, contact: Gavita International bv Tel : +31(0)297-380 450 Oosteinderweg 127 Fax : +31(0)297-380 451 1432 AH Aalsmeer : info@gavita.com The Netherlands : www.gavita.com...
Need help?
Do you have a question about the RS1 and is the answer not in the manual?
Questions and answers