Page 1
FITMENT GUIDE BAT LOGIC ErgAdaptor The ErgAdaptor contains: 1 x ErgAdaptor Plate with Straps & Clips 2 x BasePlates (1 x left & 1 x right) 8 x Flat Head 12mm Screws 8 x Nuts 8 x Washers WILL FIT CONCEPT2...
Page 2
ErgAdaptor FITMENT GUIDE RECOMMENDED HEIGHT: STEP 1 – ATTACH YOUR BASEPLATES This should be set to your comfort, the middle 5 notches on the Adaptor match the 5 height settings on the Concept 2. Next, if needed, screw your rowing Attach your BasePlates to the ErgAdaptor with the screws, washers and nuts provided.