Table of Contents
Advertisement
Beeper Definitions
The scanner communicates with the user by emitting different beeper sequences and
patterns. Table 2-1 defines beep sequences that occur during both normal scanning and
while programming the scanner.
Beeper Sequence
Standard Use
3 short high beeps
Short high beep
4 long low beeps
5 low beeps
Lo/hi/lo beep
Hi/hi/hi/lo beep
Parameter Menu Scanning
Short high beep
Lo/hi beep
Hi/lo beep
Hi/lo/hi/lo beep
Low/hi/low/hi beep
Code 39 Buffering
Hi/lo beep
3 long high beeps
Table 2-1. Standard Beeper Definitions
Power up.
A bar code symbol was decoded (if decode beeper
is enabled).
A transmission error was detected in a scanned
symbol. The data is ignored. This occurs if a unit is
not properly configured. Check option setting.
Conversion or format error.
Transmit error.
Receive error.
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel" scanned,
wrong entry, incorrect bar code programming
sequence; remain in program mode.
Keyboard parameter selected. Enter value using
bar code keypad.
Successful program exit with change in the
parameter setting.
Out of host parameter storage space. Scan
Default Parameter
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
Indication
on page 4-5.
Scanning
Set
2-7
Advertisement
Table of Contents
