Coopers G622 Instructions For Use Manual

Rise & Recline Chair Massage 8 Point
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging and locate
the chair on a flat, stable surface.
User Instructions
The chair is ready for use once the chair has been fully installed in the correct position and the user has read
and understood the user instructions.
Installation
Before moving the chair:

Ensure that it is switched off at the mains socket.

Unplug the lead from the transformer to the chair and neatly coil the cable. Place the cable either in
the side pocket or on the seat of the chair to ensure it does not become entrapped and damaged in
transit.

Ensure that there is a power socket available close to where the chair will be placed.

Protect the floor with a blanket or a sheet to avoid scratching.

The Rise & Recline Chair is heavy. Take extreme care when lifting to avoid personal injury or damage
to the product.
Note: Small black particles of powder coating may occasionally rub off the metal action of a riser & recliner
chair during use. Protect a pale coloured carpet or floor before positioning the chair.
G622 Instructions for Use
Dimensions:
75cm (L) x88cm (W) x 108cm (H)
Material:
Max weight load: 115kg
Polyester
Weight:
39.5kg
Warning
This unit is heavy and
should be lifted only by 2
persons.
v002: 22/05/20