Download Print this page

Overview - Wasp WDT3250 RF Setup Manual

Wasp bar code scanner setup guide

Advertisement

Overview

Thank you for choosing one of the following
products:
SDC-CF10G compact flash radio module with
antenna connectors
SDC-CF20G compact flash radio card with
integrated antennas
SDC-PC10G PCMCIA radio module with
antenna connectors
SDC-PC20G PCMCIA radio card with
integrated antennas
(If you are using the SDC-MCF10G miniature
compact flash radio module with antenna
connectors, contact Wasp for hardware
installation information and assistance. The
software is the same as for other Summit
products.)
When you install and use your Summit radio
module or card in a computing device, that
device can communicate to a computing network
using the IEEE 802.11g and IEEE 802.11b
protocols.
The software provided for these radio modules
runs on the computing device (your PC, for
example)that houses the module. That software
includes:
A device driver
An integrated IEEE 802.1X supplicant, which
supports the highest level of standards-based
WLAN
security with a broad range of options
The Summit Client Utility (SCU), a configuration, monitoring, and management application designed
for Summit radio modules
On Windows CE/Mobile, a service that displays a Windows System Tray icon that provides a visual
status for the Summit radio and enables the user to launch SCU by tapping the icon
This software runs on the following operating systems:
Windows CE .NET 4.2 and Windows Mobile (or Pocket PC) 2003
Windows CE .NET 5.0 and Windows Mobile 5.0 and 6.0
Windows XP and Windows XP Embedded (XPe)
Your Summit radio module is Wi-Fi CERTIFIED ® and certified for Cisco Compatible Extensions (CCX):
Wi-Fi: The Wi-Fi Alliance certifies that Summit radio modules support 802.11b and 802.11g with
WPA and WPA2, both Personal and Enterprise. The tested EAP type was PEAP-MSCHAPv2. For
details, visit the Wi-Fi Alliance Web site at http://www.wi-fi.com, click on the "Wi-Fi CERTIFIED ®
Products" link, and search for Summit Data Communications.
CCX: Summit radio modules are certified to Version 3 of the CCX specification for application-
specific devices (ASDs). For an overview of CCX, go to
http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_concept_home.html. For details on
the features in CCX V3 for ASDs, go to
http://www.cisco.com/warp/public/765/ccx/versions_and_features.shtml.
Wasp Technologies - WDT3250 RF Setup Guide
SDC-PC10G
SDC-CF10G
SDC-CF20G
1
SDC-PC20G

Advertisement

loading

This manual is also suitable for:

Sdc-cf10gSdc-cf20gSdc-pc10gSdc-pc20g