Page 2
• it-Receive - for connection to a computer. • i t-Control, it-Control Lite and it-Control Pro - for connection to battery toys or mains power adaptors. Batteries The it-Switch requires 2 x AAA batteries. These are fitted by removing the screw from the battery compartment and then the cover on the underside of the it-Switch. Ensure the batteries are inserted correctly - match the + and – symbols on the battery with those in the battery compartment. Replace the battery cover and ...
Page 3
8. I f pairing two it-Switches, repeat the process above for the second switch. Pairing information is retained in the it-Switch’s memory even after changing the batteries. Operation with it-Receive To enable the it-Switch to interact with software on the computer, the correct mode will need to be selected. The mode is selected by pressing the MODE button on the underside of the it-Switch. ...
Page 4
A single press of the MODE button will display the current mode. To find the mode you require, refer to the manual for the software you are using. For example the function needed for using one switch with Inclusive Technology software is Space (Mode 7). If you were using two switches with Inclusive Technology software you would set one to Space (Mode 7) and one to Enter (Mode 8). Mode setting Class Function Explanation Gamepad functions - used Switch Switch 1 with various software including Switch Switch 2 Inclusive Technology and Crick.* Switch Switch 3 Switch Switch 4 Mouse Left Click Mouse functions. Mouse Right Click Mouse Drag Lock...
Page 5
4. T he light on the it-Control will continue to flash while the devices communicate with each other. 5. O nce the pairing is successful the red light on the it-Control will stay on for 5 seconds. 6. I f the light continues to flash for 30 seconds and then stops, repeat the process above. If it still does not pair successfully, refer to the Troubleshooting section. Operation with it-Control devices You must set the mode on the it-Switch to 0. To do this press the MODE button on the underside of the it-Switch until the display shows 0. The operation of the it-Switch is determined by the settings on the it-Control. ...
Page 6
• D evices are not paired - see pairing instructions. • N o batteries in it-Switch, or batteries are flat - insert or replace batteries. it-Switch works erratically • B atteries in it-Switch flat - replace intermittently. batteries. • O ut of range - move it-Switch closer to receiver. • I nterference - move it-switch and receiver away from sources of ...
Maintenance Your Simply Works device contains no user serviceable parts. If it does not work as expected consult the troubleshooting guide. If there are still problems with the device please contact your supplier. Warranty Your Simply Works device is warranted against defects in manufacture or component failure. The unit is designed for domestic and educational applications.