Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Snooper Tyre Pilot STP 1400
Summary of Contents for Snooper Tyre Pilot STP 1400
- Page 1 STP 1400 Tyre Pressure Monitoring System User Manual...
-
Page 2: What's Included
What’s Included Contents STP 1400 Tyre Pressure Monitor What’s Included ....................03 Product Introduction .. -
Page 3: Product Introduction
Product Introduction Thanks for choosing Tyre Pilot TPMS product. The system is used to monitor the Installation tips pressure and temperature of each tyre. Once the pressure and temperate parameters 1. The signal between the monitor and sensors is wireless, and the transmission have been set by the user, the system will alarm if abnormal pressure and temperature distance is adequate for a passenger car due to internal anti-inference circuit are detected and alert the driver. -
Page 4: Product Assembly
Product Assembly Installation Instruction Monitor Display Installation Display Key and LCD diagram The LCD display is deigned to utilise the cigarette lighter adaptor (CLA) power for a simple installation. Please plug the display firmly into the cigarette lighter Position socket to begin using the STP 1400. User tip: The STP 1400 is designed to be an aid to safe driving, please do not become distracted by the STP1400 whilst driving. -
Page 5: Important Notice
For 1 sec For 1 sec the manufacturer of the vehicle or tyre manufacturer. Please note, Snooper Tyre Pilot System operates on an RF system, as with many RF tyre systems this system can occasionally suffer from interference Flashing Flashing depending on the systems location;... -
Page 6: Alarm Status
Monitor Parameter Display High Pressure Alarm e.g. Left Front tyre pressure reached 3.1Bar, display showing alarm with (Bi…Bi…Bi…) sound as shown. The display can show current tyre pressure and temperature. By default the unit will display the current tyre pressures, to view the temperature Pressure Reading flashing press the SET button and the temperature will be displayed for 10 seconds before Alarm Status icon flashing... -
Page 7: Sensors Installation
Sensor Low Voltage Alarm 6. During learning mode if no key was press for one minutes, the system will If one of the sensors battery becomes discharged it will send a signal to the user resume to standby operation without saving any changes. interface. -
Page 8: Technical Specification
Please note, Rubber O-ring Snooper Tyre Pilot System operates on an RF system, as with many RF tyre systems this system can occasionally suffer from interference depending on the systems location; thus causing the system to be inaccurate or not operate at all. - Page 9 @snooperuk Snooper UK...
Need help?
Do you have a question about the Tyre Pilot STP 1400 and is the answer not in the manual?
Questions and answers