Table of Contents
Advertisement
Quick Links
SPLIT228RDM
8-way DMX and RDM Splitter
USER MANUAL
For your safety, please read this user manual carefully before use.
Event Lighting reserves the right to revise the manual at any time. Information and specifications
within this manual are subject to change without notice. Event Lighting assumes no liability or
responsibility for any errors or omissions. Please consult Event Lighting for any clarification or
information regarding this item.
Version 1.0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Event Lighting SPLIT228RDM
- Page 1 For your safety, please read this user manual carefully before use. Event Lighting reserves the right to revise the manual at any time. Information and specifications within this manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any errors or omissions.
-
Page 2: Safety Instructions
Do not operate this device at temperatures higher than 40°C (104°F). Product Description SPLIT228RDM is a rack mountable DMX and RDM splitter designed to optically insulate and distribute two DMX inputs into eight outputs via 5-pin XLR connectors. 1: 5-pin DMX Signal Connector In (A-Amber). - Page 3 www.event-lighting.com.au Menu Input Use the input selector button to view the status of the selected input: Amber or Blue. Press Up/Down to view incoming DMX signal values. Assign Input Signals to Outputs • Press one of the eight input signal selectors to view the input signal source. •...
-
Page 4: Control Panel
D: Home button E: Down button F: Right button Main Menu Options SPLIT228RDM will display the following screen upon start-up: No DMX signal DMX signal present DMX Signal Weak Press Left to enter the main menu. The following options will be displayed: •... -
Page 5: Input A/Input B
Press Right to enter the selected option. Mode Press Up/Down to select the desired DMX mode from the following options: • DMX and RDM (SPLIT228RDM functions as a bi-directional RDM splitter) • Classic DMX (SPLIT228RDM only receives DMX signals, disables RDM) •... - Page 6 On – Incoming DMX data will be received and used as a whole package, providing smooth performance, with a longer delay time. Off – Incoming DMX data will not be used as a whole package, and SPLIT228RDM will react immediately to DMX input adjustments, resulting in shorter delay times. However, not all changes will be visible until a new DMX data package is loaded.
- Page 7 www.event-lighting.com.au Merge Mode Use this option to configure Merge settings. Press Up/Down to select from the following options: • HTP: Highest level of source A OR B on a merged channel takes priority. • LTP: Last changed level of source A OR B on a merged channel takes priority. •...
- Page 8 DMX 20Hz • DMX 10Hz Press Right to confirm the selection. Failure Behaviour This option determines how SPLIT228RDM reacts to a DMX signal error. Press Up/Down to select from the following options: • Off: SPLIT228RDM will black out the output. •...
- Page 9 www.event-lighting.com.au Outputs Use this option to display status information about the selected output. Press Up/Down to select from the following options: • Output 1 • Output 2 • Output 3 • Output 4 • Output 5 • Output 6 • Output 7 •...
- Page 10 Settings Use this option to configure SPLIT228RDM. Press Up/Down to select from the following options: • Label: View and edit the display name of the unit. • Information: Display the unit’s unique identifiers, software and firmware versions. Press Enter to confirm the selection.
-
Page 11: Technical Specifications
Default Settings Use this option to reset SPLIT228RDM to factory default settings. Press Left to cancel. Press Right to continue with the factory reset. The following screen will be displayed once the process is complete. Technical Specifications Protocol: DMX512 and RDM.
Need help?
Do you have a question about the SPLIT228RDM and is the answer not in the manual?
Questions and answers