Ofs FITELS178 Quick Reference Manual

Safety Instructions

Before operating this product, please read the user's manual of safety

instructions. The safety instructions are to help you use this product in a

safe and correct way, and to prevent danger or injury to yourself or others.

① Turn on power.

② Select applicable program

③ Perform Arc Check.

※ Please see "Arc Check" for

details.

④ Insert protection sleeve.

⑤ Prepare the fibers.

⑥ Set fibers to the splicer.

⑦ Press

key.

⑧ Remove spliced fiber.

⑨ Slide protection sleeve over

spiced point.

⑩ Place fiber to heater.

⑪ Press

key.

⑫ Remove the fiber.

FITELS178/S153/S123

Quick Reference guide

Setting the Fiber in the Fiber Holder

Place the fiber into the fiber holder leaving

Stripping the Fiber Coating

Fiber Cleaning

Fiber Cleaving

Place fiber holder into cleaver, then press the lever.

< Fiber Preparation >

Edge of the coating

Hold the fiber tightly. Then

move the S211 in the

direction indicated by the

arrow.

Clean the bare fiber with a lint free

wipe soaked with fiber prep fluid.

S326A Cleaver

Table of Contents

Do you have a question about the FITELS178 and is the answer not in the manual?

Page 1 FITELS178/S153/S123 Quick Reference guide Safety Instructions Before operating this product, please read the user’s manual of safety instructions. The safety instructions are to help you use this product in a safe and correct way, and to prevent danger or injury to yourself or others.
Page 2 FITELS178/S153/S123 Quick Reference guide Selecting a Fusion Program* < Fusion Program> Select “All Programs”. Select “Fusion PRGM” Select applicable icon from the menu. fusion program. < Heater Program> Select “Heater PRGM” Select applicable icon from the menu. heater program. Arc Check Arc Check is the function to adjust the arc power in order to ensure optimal splicing results.
Page 3 FITELS178/S153/S123 Quick Reference guide Cleaning and Maintenance Procedures < Cleaning V-groove> Cleaning brush Clean V-groove by using a cleaning brush Run fiber across V-groove to or a cotton swab soaked with ethanol. remove dust in V-groove. < Cleaning Fiber Clamp>...
Page 4 FITELS178/S153/S123 Quick Reference guide Operation Keys Up/ Down/ Left/ Right Key Move the cursor and change the value Function 1 Key Function 2 Key Select the function shown on the Select the function shown on the left bottom corner of LCD.

Fitels153Fitels123