SAVEPOWER TV/PC STANDBY STOP Manual

Advertisement

SAFETY

Read these instructions carefully
• T his appliance is for indoor use in dry locations. Keep it from humidity and drip-
ping or splashing water.
• T he power supply should not be operated above an ambient temperature of 40°C
• T he maximum rated power capacity as shown on the product label should not be
exceeded.
• T he appliance is not to be repaired or used if damaged or defective.
• T his appliance should only be connected to a mains socket outlet with a protective
earthing connection.
• D o not dispose of electrical appliances as unsorted municipal waste, use separate
disposal facilities. Contact your local government for information on disposal
facilities. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
the health and well-being of your community. When replacing an old appliance
the retailer is legally obligated to take back your old appliance for disposal free of
charge.

TECHNICAL DATA

Product name:
TV/PC Standby Stop
Input:
180-250V A/C 5A
Output Max. load:
Max. own consumption:
Degree of protection:
In compliance with the safety norms & directives of 89/336/EEC
Produced by:
SavePower A/S
www.savepower.eu
1000W
< 0,025W
IP20
TV/PC STANDBY STOP
The TV/PC Standby Stop takes control over the power supply of all
connected devices. Upon installation, it measures the total standby
power level of all connected equipment and shuts off power
completely when this level is reached. Thus it saves the total standby
power consumption of all devices, it controls. This product also
protects connected devices against overvoltage through the power
network, which prevents damage and minimizes the risk of fire.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TV/PC STANDBY STOP and is the answer not in the manual?

Questions and answers

Summary of Contents for SAVEPOWER TV/PC STANDBY STOP

  • Page 1 TV/PC STANDBY STOP TECHNICAL DATA Product name: TV/PC Standby Stop The TV/PC Standby Stop takes control over the power supply of all connected devices. Upon installation, it measures the total standby Input: 180-250V A/C 5A power level of all connected equipment and shuts off power Output Max.
  • Page 2 If TV/PC Standby Stop accepts the signal, the indicator lamp Universal Elspareskinne will flash rapidly. If this does not happen, use another remote control to activate TV mode. Tilbehør Universal Elspareskinne e. TV/PC Standby Stop is set to PC mode if it does not recieve a remote control signal within the calibration period Tilbehør Permanent strøm Skærm...

Table of Contents