Do you have a question about the OPT-J0410 and is the answer not in the manual?
Questions and answers
Summary of Contents for MIMAKI OPT-J0410
Page 1
Rear Side and Right Side of the 装置背面 / 側面 ........7 Machine...........3 メディアをセットする......8 Setting a Media ........4 ヘッド高さを調整する ......8 Adjusting the Head Height.......4 ロールメディアをセットする....8 Setting a roll media........4 リーフメディアをセットする....9 Setting leaf media........5 MIMAKI ENGINEERING CO., LTD. D203048-10 URL: http://eng.mimaki.co.jp/...
Page 2
Congratulations on your purchase of “3.2m Roll shaft unit” for MIMAKI color ink jet printer SIJ series. DISCLAIMER OF WARRANTY THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF...
Page 3
About installing this machine Where to Install This Machine This optional kit is used with the Mimaki SIJ Series/UJV55-320 Inkjet Printer to ensure stable feeding of media on the feeding side, where it is easy for the media to come loose.
Page 4
Setting a Media Setting a Media Set the roll holder for right and left. (1) Insert the roll holder (right and left) in a paper The method for setting media when using the 3.2m Roll core and tighten with the ratchet handle. shaft unit is explained below.
Page 5
Setting a Media Install the media set shaft (with the roll Setting leaf media media) on the feeding device, and then close the AMF cover. • When using leaf media, no particular operations are required if the 3.2 Roll shaft unit is installed. For information on how to set leaf media, refer to the operation manual that came with your printer.
Need help?
Do you have a question about the OPT-J0410 and is the answer not in the manual?
Questions and answers