Keter FORTOOLS PORTABLECLAMPING WORKSTATION Instruction Manual page 5

J4 - With the clamp in a fully horizontal position, release the front handle to lock the clamp
in place. (T o remove the clamp, squeeze the handle and lift up.)
J5 - Depress the release lever and move the front jaw into position against the material to
be clamped. Squeeze the front handle to apply pressure.
J6 - T o clamp vertically, insert the clamp through the slot in the tabletop as shown.
J1
J3
J5
J
J2
J4
2
J6
5
1