Advertisement
Quick Links
Advertisement
Related Manuals for Kitables USB CHARGER
Summary of Contents for Kitables USB CHARGER
- Page 1 USB CHARGER kit instructions ®...
-
Page 2: Tools Needed
Connect your device to the USB Booster with your device’s USB charging cable and turn switch on to charge your device.* * N o guarantee that USB Charger will charge your device. In testing, it has worked with iPhone and Android OS Smartphones. - Page 3 USB Charger Kit Instructions Start by gluing 5 of the 6 box sides Start Connecting Wires together. Do not glue the “top” Begin by connecting the Battery to the Micro piece at this time. Each side cutout USB Charging Module (blue board). This is fits a specific component.
- Page 4 USB Charger Kit Instructions When your Battery includes a 2-Pin The Battery in your kit may include a JST, solder the Red wire of the 2-Wire 2-Pin JST. If this is the case, your kit JST connector to the B+ terminal and...
- Page 5 USB Charger Kit Instructions On the blue Micro USB Charging Module, solder Solder the Red wire from the OUT+ an available Red wire to the OUT+ terminal terminal of the Charging Module (blue and an available Black Wire to the OUT- board) to the IN+ terminal on the USB terminal.
- Page 6 USB Charger Kit Instructions Before soldering, push switch into Solder the Black wire from the IN- terminal of the USB Booster (green cutout on the side of the wood box from the outside in. It should fit board) to one Switch pin. Solder the...
- Page 7 USB Charger Kit Instructions Be sure the switch is off. Secure components to the bottom of the box case with glue or other At this point, you should test adhesive. We recommend using a hot glue gun your kit to confirm all for added adhesive as the USB Booster and connections are correct.
- Page 8 USB Charger Kit Instructions Carefully position the Battery in the box. Turn the switch on and the USB Booster should light up to show it is ready to charge your devices. After confirming your Charger Kit is working correctly, you can now position and secure the top of the box to complete your kit.
- Page 9 USB Charger Kit Instructions Wiring Diagram Charging Turn Switch off. Plug a micro USB cable into the Micro USB Charging Module port LIPO (the blue board) and charge from a wall BATTERY outlet or other power source. Charging with a wall outlet takes approximately 2...
- Page 10 USB Charger Kit Instructions You have now completed a Kitables Kit! If you have questions, check out our FAQ at Kitables.co/FAQ or email us at info@kitables.co...
Need help?
Do you have a question about the USB CHARGER and is the answer not in the manual?
Questions and answers