Baudcom BD-ONU-802RWT-H User Manual page 19

SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Delete
Enable
Mode
NAT
Service Type
Enable VLAN
VLAN
VLAN ID
Multicast VLAN
802.1P
LAN Port Binding
SSID Port Binding
IP Protocol Mode
MTU
WAN IP Mode
Username
Password
Keep Alive
PPPoE Time
PPPoE Mode
Service Name
Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn Skyper: robert.luo905
If you want to delete one connection, please select the wan
connection you want to delete and then check "Delete" option.
Enable or Disable the WAN Connection you have choosed.
Route/Bridge. The device works on route mode with this WAN
connection.
If you select Route WAN Connection,the NAT option is default
enable.If you select Bridge WAN connection,the NAT option is
default disable. Checked indicates the NAT Function is enabled.
Service mode indicates what the wan connection is used for.
There are INTERET 、TR069、Other and Voip for choosing.
Checked indicates the packets are transmitted by the PON port
take VLAN tag. Unchecked indicates the packets are transmitted
by the PON port don't take VLAN tag.
Input the VLAN ID you want to set. Range is 0~4094. Input 0
means don't use any VLAN.
Input the VLAN ID you want to set,according to the IPTV
Confiuration.This option default value is -1,means no use.
Select VLAN priority you want to set. Range is 0~7.
Checked the LAN Port indicates that lan interface would act with
this wan connection Route or Bridge.
Checked the SSID Port indicates that lan interface would act with
this wan connection route or bridge.
IPv4、IPv6、IPv4/IPv6
Max transfer unit. Default Value (in Byte):
1500(static/DHCP) or 1492(PPPoE).
IPoE/PPPoE/Static
PPPOE account.
PPPOE password.
The PPP Link maintenance time. This parameter value default is
60S.
Continous or Connect on Demand
This option is not required generally, but if the PPPoE Server
checks the option, you should input according to ISP.
Page 15