Uninstalling And Installing The Aoc-A25G-B2S (With 1U Bracket) - Supermicro AOC-A25G-b2S User Manual

3-3 Uninstalling and Installing the AOC-A25G-b2S (with
1U bracket)
Follow the steps below to install an add-on card into your system. (If the system
is fixed onto a rack, the removal of server top cover is not required. If the system
is not anchored to a fixed structure, it is recommended to remove the system top
cover for ease of installation.)
A. Uninstalling an AIOM Module
1. Slide the black latch to the left to "unlock" position, then disengage the AIOM mod-
ule from the chassis structure by pushing the blue latch once to extend it outward.
2. Pull the blue latch to disengage the AIOM module from the motherboard connec-
tor, then gently slide the AIOM module out.
The latch to engage/
disengage the AIOM
module
Uninstall the AIOM
card from this slot
The AIOM card with
the bracket installed
3-3
Chapter 3: Installation