Specifications - Sony PFV-SP3300 Operation Manual

Specifications

Power requirements 100 to 240 V AC, 50/60 Hz
Current drain 3.5 A to 1.5 A
Peak inrush current (1) Power ON, current probe
method: 90A (240V), 20A
(100V)
(2) Hot switching inrush
current, measured in
accordance with European
standard EN55103-1: 30A
(230V)
Power supply capacity +12 V DC: max. 18.7 A
Operating temperature +5°C to +40°C
(+41°F to +104°F)
Performance guaranteed temperature
+10°C to +35°C
(+50°F to +95°F)
Storage temperature –20°C to +60°C
(–4°F to +140°F)
Operating humidity 10% to 90%
(no condensation)
440 × 132.4 × 550 mm (w/h/d)
Dimensions
(17
Mass Approx. 11 kg (24 lb 4 oz)
(not including the optional
boards)
Inputs
Remote S-BUS remote connector:
BNC type (1)
Sync input HD tri-level sync/black burst:
BNC type, 2 pairs (with loop-
through outputs)
Status output STATUS OUT: Mini D-sub
15-pin, female (1)
Supplied accessories Operation Manual (1)
Installation Manual (1)
Accessories not supplied
AC power cord (for USA and Canada only)
(125 V 10 A 2.4 m (8 ft.))
(Part No.: 1-557-377-11)
AC power cord (for Europe only)
(250 V 10 A 2.4 m (8 ft.))
(Part No.: 1-782-929-21)
Design and specifications are subject to change
without notice.
6 (E)
× 5 × 21
3 1 3
/ / / inches)
8 4 4
Note
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON
WHATSOEVER.