Advertisement
Model
Manual
If you have a STARWATCH software CD, you can find
☞
the ILAN422/485 setup program in the CD.
Note
Alternatively, you can download the ILAN422/485
☞
setup program from the IDTECK Website.
(www.idteck.com).
A. Connection:
1. To connect directly to the computer, use a cross over cable.
2. To use a HUB, use direct cables to separately connect the
Converter and the computer to the hub.
B. Quick Converter Setup：
1. Install IPSearch.exe and run it.
2. Click "Refresh" to search for the Converter. If you fail to find the
connected Converter, check if the connection and the TCP/IP
settings of the system are all correct.
3. From the list, left-click on the Converter you'd like to configure.
4. Enter the IP Address, Subnet Mask and click "Alter" to save
the information.
5. Close the dialog box. Then, wait for about 5 seconds and press
"Refresh" to update data. Double-click on the Converter you've
just configured, and the Converter Web configuration window
will open.
【Screen 1】
ILAN422/485
Quick Setup
User Name：admin
Password：admin
【Screen 2】
3
Advertisement
