Onkyo TX-SR876 Quick Setup page 2

AV Component Hookup
With an HDMI cable you can send both audio and video with a single cable,
making connecting simple and keeping wires neat.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. Digital audio signals received
at HDMI IN input are output by the speakers and headphones connected
to the AV receiver.
HDMI
Cable/satellite
OUT
Using the HDMI Inputs
If there's no picture on your TV, you'll need to
assign the HDMI inputs as necessary using the
onscreen setup menus.
If you connect your DVD player to the AV receiver's
HDMI IN 1, and connect your cable or satellite
receiver to HDMI IN 3, as shown above, it's not
necessary to change the default assignments.
In addition, you must set the "Monitor Out"
setting to "HDMI Main" by pressing the
[HDMI OUT] button.
(If your TV is not connected to the HDMI OUT,
set the "Monitor Out" setting to "Analog".)
TV
HDMI
IN
HDMI
OUT DVD player
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
Antenna input
(e.g., RF IN) please refer to the
instruction manual.
On the front panel
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Lock Setup
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
1–2. HDMI Input
DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME/TV HDMI4
AUX1 - - - - -
AUX2 - - - - -
If your TV or player doesn't support HDMI, use the analog or digital
connections shown below.
IF NO HDMI
DIGITAL AUDIO VIDEO
OUT OUT OUT
COAXIAL L
R
COAXIAL
DIGITAL
OUT
Using the Digital Inputs
If there's no sound, you'll need to assign the
digital inputs as necessary using the onscreen
setup menus.
If you connect your DVD player to the AV
receiver's DIGITAL COAXIAL IN 1, and your
cable/satellite receiver to the DIGITAL COAXIAL IN 3,
as shown, it's not necessary to assign the digital input.
In addition, you must set the "Monitor
Out" setting to "Analog" by pressing
the [HDMI OUT] button first.
See the other side of this sheet for the Speaker hookup.
DVD player
VIDEO 1
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
L
Cable/
R
satellite
VIDEO AUDIO Antenna input
OUT OUT (e.g..RF IN)
On the front panel
TV
IN
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Lock Setup
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
1–4. Digital Audio Input
DVD COAX1
VCR/DVR COAX2
CBL/SAT COAX3
GAME/TV OPT1
AUX1 - - - - -
AUX2 FRONT