Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Satfi RV
- Page 1 SATFI RV Digital Controller Receiver OPERATING MANUAL...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page PRECAUTIONS ......................1 FRONT VIEW ....................... 2 REAR VIEW ........................2 CONNECTIONS ......................2 CONNECTION DIAGRAM ..................3 FIRST INSTALLATION AND TV SETTINGS ............4 CHANNEL SELECTION ....................4 INFOBAR ........................4 TELETEXT ........................4 CHANNEL LIST – SELECTION OF THE LIST TYPE ..........5 CHANNEL LIST –... -
Page 5: Precautions
Dispose of the used batteries properly in order to protect the environment. This receiver is not a standard satellite receiver. It can be used only with SatFi RV antenna. If you connect an LNB to the output of this unit, it may cause damage of LNB or receiver. -
Page 6: Front View
User guide FRONT VIEW REAR VIEW 1 LNB input 5 Serial port 2 Loop out 6 Power 3 RCA audio outputs (Left, Right) 7 Infrared Remote Control 4 RCA video output CONNECTIONS Before making the connections of the unit, make sure that the plug is not inserted into the mains outlet and do not plug it in, until all connections are completed. -
Page 7: Connection Diagram
INTRODUCTION CONNECTION DIAGRAM Connection to TV through RCA Video RCA output should be connected to TV Video RCA inputs. Audio RCA outputs can be connected to TV Audio RCA inputs. Audio Amplifier Connection Connection through RCA Outputs You may connect your unit to a audio amplifier through RCA outputs. For this purpose, use AUDIO-L and AUDIO-R stereo outputs of your unit. -
Page 8: First Installation And Tv Settings
MENU OPERATIONS FIRST INSTALLATION AND TV SETTINGS When you have completed the required connections of your satellite receiver, you can operate it, plugging into a DC power outlet. (Please refer to “Connections” herein to verify their correctness.) After you complete all the connections required, turn on the TV and receiver, and press the “MENU”... -
Page 9: Channel List - Selection Of The List Type
MENU OPERATIONS CHANNEL LIST – SELECTION OF THE LIST TYPE If you press “OK” button when no menu is displayed, the Channel List will be displayed on the screen. The channels may be listed in different types in Channel List menu. Press the “RED” button to select the list type. - Page 10 MENU OPERATIONS FTA/SCRAMBLED: The third listing type is listing the channels according to if the channel is FTA (Free to air) or Scrambled (coded) channel. After press the “RED” button in the Channel List, select the “FTA/Scrambled” by using “▲”/“▼” buttons and press the “OK” button.
-
Page 11: Channel List - Operation Menu
MENU OPERATIONS CHANNEL LIST – OPERATION MENU Different operations are also possible in the Channel List menu. Press “GREEN” button to select operation type. After press the “GREEN” button in the Channel List, select the Operation by using “◄”/“►” buttons. There are 8 symbols in the Channel List for these operations. ... - Page 12 MENU OPERATIONS After you create a new Favorite Group you can change the name of the group. For this operation “Rename Group” option is used. For adding a channel to the created group come on to the “Add/Rem. Channel” and press “OK” button.
- Page 13 MENU OPERATIONS MOVE: Press “GREEN” button to enter operation menu in the Channel List. Select by using “◄”/“►” buttons, “Move” operation is activated. When you press “OK” button the menu on the right comes up. There are Channel List on the left column and the channels will be moved on the right column.
- Page 14 MENU OPERATIONS SKIP: Press “GREEN” button to enter operation menu in the Channel List. Select by using “◄”/“►” buttons, “Skip” operation is activated. If there is a channel that you want to skip while changing the channels in the Channel List, come to that channel by using “▲”/“▼”...
-
Page 15: Radio
MENU OPERATIONS RADIO Pressing the “RADIO” button activates the “Only Radio” mode. By using “▲”, “▼” and numeric buttons, you can select a radio channel. You can deactivate the radio mode by pressing the “RADIO” button again. When you press “RADIO” button again, “All” mode is selected, when you press “RADIO”... -
Page 16: Main Menu
MENU OPERATIONS MAIN MENU The menu which is displayed when you press the “MENU” button while there is no menu on the screen is the MAIN MENU. By using the “◄”/“►” and “▲”/“▼” buttons, you can move the cursor right, left, up and down. You can move onto the symbol you want and enter the sub- menu belongs to that symbol by pressing “OK”... -
Page 17: Transponder Li̇st
MENU OPERATIONS TRANSPONDER LİST While in the main menu, move to the Installation by using “◄”/“►” and “▲”/“▼” buttons and press “OK” button. Press “OK” “Transponder” option. button again Transponder List sub-menu is entered. There are transponder list of the related satellite on the left column and the program list belongs to the that transponder on the right column in the Transponder List menu. -
Page 18: Changing Program Settings
MENU OPERATIONS Move on the “Search” line in Transponder menu. Searching processed is started. You may search all TV and Radio channels in that transponder by this Search process. All found TV and Radio channels will be listed on the screen. - Page 19 MENU OPERATIONS PID Setting: When you press “GREEN” button, PID menu comes up. The values in this menu are set automatically while searching, so it is not required to change these values by the user. AUDIO Setting: When you press “YELLOW” button, Audio menu comes up.
-
Page 20: Automatic Search
MENU OPERATIONS AUTOMATIC SEARCH While in the main menu, move to the Installation by using “◄”/“►” and “▲”/“▼” buttons and press “OK” button. Press “OK” button again on “Automatic Search” option. All Scan sub-menu is entered. Select the satellite by using “◄”/“►” button on “Satellite”... -
Page 21: System
MENU OPERATIONS SYSTEM The second sub-menu in the main menu is System menu. While in the main menu, move to the System by using “◄”/“►” and “▲”/“▼” buttons and press “OK” button. System sub- menu is displayed. There are “OSD Settings”, “Time and Date”, “Parental Settings”, “Other... -
Page 22: Tv Settings
MENU OPERATIONS TV SETTINGS While in the main menu, move to the System by using “◄”/“►” and “▲”/“▼” buttons and press “OK” button. Press “OK” button again on “TV Settings” option. TV Settings sub-menu is entered. You can select the system as “NTSC”, “PAL B/G”... -
Page 23: Parental Settings
MENU OPERATIONS PARENTAL SETTINGS Enter the Main Menu and then the Parental Settings sub-menu from the System menu. “Enter Pin” message will be displayed. Enter the 4 digits password by using numeric buttons. (Factory setting of your receiver is 0,0,0,0.) ... -
Page 24: Other Settings
MENU OPERATIONS OTHER SETTINGS Enter the Main Menu and then the Other Settings sub-menu from the System menu. If you are using an LNB dedicated to you, the LNB power of your satellite receiver must be switched on. Common LNB is used for inner- building distribution systems. -
Page 25: Timers
MENU OPERATIONS TIMERS Timers are used to turn on/off the unit at the programmed times. Your receiver contains 8 timers. For timer settings: Enter the Main Menu and then move to the Timers sub menu. Select the timer that you will make a change, by using “▲”/“▼”... -
Page 26: Extras
MENU OPERATIONS EXTRAS While in the main menu, move to the Extras by using “◄”/“►” and “▲”/“▼” buttons and press “OK” button. Extras sub-menu is entered. You can access some useful programs in this menu. While in the Extras menu, move to the “Calendar”... -
Page 27: Games
MENU OPERATIONS GAMES While in the main menu, move to the Games by using “◄”/“►” and “▲”/“▼” buttons and press “OK” button. Games sub-menu is entered. ELECTRONIC PROGRAM GUIDE - EPG Broadcast timetable will be sent through some programs. You may use the EPG feature of the unit to get this information. - Page 28 DIGITAL SATELLITE RECEIVER...
-
Page 29: Troubleshooting
Menus of the unit appear on the TV, but no Make sure that the unit is connected to the picture or sound occurs. SatFi RV antenna correctly; wait for satellite search and fine tuning to complete. Also make sure that the program settings of the unit are set to one of the programs included in the satellite that you want to watch &... - Page 31 GENERAL SPECIFICATIONS Animated OSD 8000 Channels Smart channel scan Very fast channel switch Mosaic channels (15 still picture, 1 live picture) Picture in Picture (PIP) Various Games Various Utilities Custom OSD-Radio backgrounds ...
- Page 32 TECHNICAL SPECIFICATIONS TUNER Standard: DVB-S Input signal level: -65…-25 dBm Frequency range: 950-2150 MHz Demodulation: QPSK Symbol rate: 1-45 Msps Code rates: 1/2, 2/3, 3/4, 5/6 and 7/8 Reed Solomon: 204, 188, 8 System: SCPC, MCPC Channel lock: Output: Loop-through output 75 Ω...
Need help?
Do you have a question about the RV and is the answer not in the manual?
Questions and answers