Eneroid EN10A2 User Manual

Eneroid EN10A2 User Manual

Smart battery charger & storage

Advertisement

SMART BATTERY CHARGER & STORAGE
EN10A2ㅣEN10A2
Important Safety Instructions
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EN10A2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eneroid EN10A2

  • Page 1 SMART BATTERY CHARGER & STORAGE EN10A2ㅣEN10A2 Important Safety Instructions User's Manual...
  • Page 2 Thank you for purchasing ENEROID. This manual contains important safty and operating instructions for eneroid battery charger. Before Using, please read all of instructions. Important Safety Instructions 1. Do not use the charger in humid conditions. 2. Do not use the charger if it has a damaged plug.
  • Page 3: Charging Time

    Specfications Model EN10A2 EN10A3 Compatibility AA battery (Ni-MH, Ni-CD) AAA battery (Ni-MH, Ni-CD) Dimensions 11.5 x 12.5 x18 cm 11.5 x 12.5 x18 cm Weight 650 g 650 g Input Power USB-C type, 5V 2A USB-C type, 5V 2A Standby Capacity...
  • Page 4: Package Contents

    Package Contents Eneroid Body USB C-Type Cable User Manual...
  • Page 5: Names Of Each Part

    Names of Each Part C-Type DC in Stand-by room cover Stand-by room Operation button Error indication ring Battery Storage Charged Battery Storage Bad Battery Storage...
  • Page 6: Connecting Power

    Connecting power Connect the C-Type cable supplied at the back of the Eneroid. Press the power button briefly to enter standby mode (power button blue LED lights up).
  • Page 7 Any Polarity Direction Regardless of the direction of the battery terminal, ENEROID is able to recognize the terminals and charge up the batteries automatically.
  • Page 8: Charging The Batteries

    Charging the Batteries Close the cover and press the power button in standby mode to start charging. While charging, the red LED on the Eneroid's power button blinks.
  • Page 9: Using The Battery

    Using the battery When charging is complete, the unit enters standby mode. Open the locker and use a charged battery on the right side of the locker. Discard the batteries in the defective battery compartment on the left side of the cabinet as they can no longer be reused. Charged...
  • Page 10: Sleep Mode

    Sleep mode While in sleep mode or charging, press the power button briefly to switch to standby mode. When in standby mode, the blue LED on the power button turns on. If you do not use your computer for a certain period of time, it goes to sleep (power button LED off).
  • Page 11: Other Errors

    Error You can handle the error situation intuitively with the LED lighting of the ring. When the LED above the ring lights up, open the cover and check the waiting area. When the LED below the ring lights up, open the storage box and check if the battery is full.
  • Page 12 SMART BATTERY CHARGER & STORAGE ⓒ2016 Eneroid. All rights reserved. Eneroid, the Eneroid logo, and other Eneroid marks are owned by Eneroid and may be registered. All other trademarks are property of their respective owners. Eneroid assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

This manual is also suitable for:

En10a3

Table of Contents

Save PDF