1. Manuals
  2. Brands
  3. D-MAX Manuals
  4. Keyboard
  5. DCK-500A
  6. User manual

D-MAX DCK-500A User Manual

Control keyboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

CONTROL KEYBOARD
USER MANUAL
DCK-500A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCK-500A and is the answer not in the manual?

Questions and answers

Related Manuals for D-MAX DCK-500A

Summary of Contents for D-MAX DCK-500A

  • Page 1 CONTROL KEYBOARD USER MANUAL DCK-500A...

  • Page 2: Table Of Contents

    CONTENTS 1. Caution before installation 2. Features & Distinctions COMPONENTS Summary & Features Keyboard Functional Keys JUNCTION BOX 3. How to Use in Detail Basic Connection How to set at Beginning CONTROL MODE Setup 1. PTZ CONTROL MODE Setup and Functions 2.

  • Page 3: Caution Before Installation

    1. Caution before installation hank you very much for having D-max keyboard. You are strongly required to study this manual before installation. Facing problem or something you don’t understand while using, please consult with your systems installers or service personnel.
  • Page 4 Caution in use Install the unit after you read following advice. Avoid following acts, □ Do not try to disassemble the appliance or put any foreign element. It may cause a problem. Turn the power off before installation. □ Before you install the unit, please check the power voltage and turn the switch on.

  • Page 5: Features & Distinctions

    2. Features & Distinctions 1). COMPONENTS ① Body of the Keyboard + Touch pen ② Data Box (Junction Box) ③ Connector Cable (Modular jack) ④ User Manual...

  • Page 6: Summary & Features

    This appliance can be used as a Matrix main(sub) keyboard, CCTV Transmitter main(sub) keyboard at user’s option. This manual is explaining only about controlling CCTV Transmitter, please refer to the matrix manual for the detailed use of D-MAX Matrix system. Features • Locking monitor and camera control.

  • Page 7: Keyboard Functional Keys

    3). Keyboard Functional Keys 1. Upper Section 1), 2) F/N, F/F : controls focus while using Zoom lens 3) Numeric keypad: used to input numerical value or other functions 4) CLR(CLEAR): Used to cancel input command or number. 5) ENT(ENTER) : press this key to input command or save, run designated commands 6) SET : Use this key for camera Setup or Keyboard User’s Setup Mode.
  • Page 8 13) Color LCD(Screen): It has many different buttons for each function and supports real time Video. 14) Sensor: allows to remotely control keyboard with remote controller (soon be released) 15) Jog-shuttle: controls DVR 16) Touch-Pen: Used to touch the LCD screen and run functions. 2.

  • Page 9: Junction Box

    4). Data Box (Junction box) Set the communication mode to either RS-485 or RS-422 at your option. When communicating in RS-485, the switch(485/422) at both sides should be moved to RS-485. (It is set to RS-485 when we take from warehouse) 485+ 485- NC 485+ 485- N C N C 485+ 485- N C N C...

  • Page 10: How To Use In Detail

    3. How to Use in Detail 1). Basic Connection 485+: 485-: 3 lines (485+, 485-, GND) can be used for data line. (Ground could be of help when earth is stable, but normally 485+, 485- can be used for data connection)

  • Page 11: How To Set At Beginning

    - If the Power is given to the Unit, below picture will appear. 1. Factory Default • MAIN Keyboard • PTZ Control mode • Protocol : D-max 9600 • Mon:01/DVR:01/Cam:001 2. Setting the ‘SETUP Mode’ On this mode, Main/ Sub Keyboard can be selected and communication setup of camera or monitor can be set and Password Setup can be made.
  • Page 12 (Default is 0000) ③ If password is input, Setup mode will show up. ① SET CAMERA Setup for communication and usage of camera connected to this unit can be set here. ① Move the Joystick to “SET CAMERA”. ② Press key to enter Setup Mode.
  • Page 13 - D-max, Pelco-P, Pelco-D, Samsung / 9600, 4800, 2400bps can be chosen. ④ Press to escape to the previous menu, press to finish the setup mode after save. ② MONITOR Setup You can set the Monitors here and make it useful or useless from this keyboard.
  • Page 14 ③ KEYBOARD SETTING Here you can select the usage of the keyboard. ① On this main “SETUP” Menu, move to “3. SET KEYBOARD” ② Press to enter Keyboard Setup Mode. ③ Select article number by moving Joystick up/ down and change value moving Joystick left/ right. 1) SELECT MAIN/SUB The unit can be set as Main Keyboard or Sub Keyboard..
  • Page 15 Up to 8 Sub keyboards can be set. 3) ALARM TYPE ARU(Alarm Receiver Unit): With ARU connected, Alarm signal can be received.. CAMERA: The camera receives Alarm signal by itself. ♦ ex). 1) SELECT MAIN/SUB: MAIN ---------- The user wants to use it as Main Keyboard. 2) SELECT SUB KEY Q,ty: 05 ---------- It will allow max.
  • Page 16 Select compatible DVR. ① Choose “SELECT DVR” moving Joystick up/ down under Main Setup Mode. ② Press to enter “SELECT DVR” Mode. • As for now(ver.1.1), only D-max DVR can be controlled. (Other DVRs can be added later.) ⑥ SYSTEM SETUP Coordinates of the Touch Pad Joystick operation can be adjusted, Password Setup and factory reset can be made under this menu.
  • Page 17 Move to “1) CALIBRATION TOUCH PAD” article and press Then 5 cross marks (“+”) will appear in turn. Just click on the cross using Touch pen. If the coordinates correctly pressed, you should see next coordinate. After you are done with 5 coordinates(①~⑤), “Thank you”...
  • Page 18 ③ ④ ⑤ ⑥ 2) CALIBRATION JOYSTICK Checking Out operation status of Joystick such as Zoom In/ Out, Up/ Down and Left/ Right. ① With the “2)CALIBRATION JOYSTICK” selected, press ② As the following message, push the Joystick to Up/ Down, Left/ Right and turn the Joystick head clockwise or counterclockwise for Zoom In/ Out.
  • Page 19 ③ If all procedures are completed ok, a message, “JOYSTICK TEST GOOD!” will show up for a couple of seconds and upper menu will appear. 3) NEW PASSWORD New password can be made here. ① With the article, “3)NEW PASSWORD” selected, input key.

  • Page 20: Control Mode Setup

    3). CONTROL MODE Setup You will come to know more details about PTZ, MATRIX, DVR mode on this chapter. Basic Operation Interface ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① MAIN/SUB Keyboard Indicator It indicates on PTZ/ MATRIX mode if the unit is main keyboard or sub keyboard. (It also shows if the unit is 1 or 8 keyboard.
  • Page 21 - This section indicates connection status of MAIN/SUB KEYBOARD and signals of MATRIX, TX, RX. • MAIN KEYBOARD: If the unit is set as main keyboard, it blinks. • MAIN/SUB KEYBOARD 1~8: If you have set SBU KEYBOARD, it will be seen in red. (The first bar would blink when the unit is set as MAIN Keyboard.

  • Page 22: Ptz Control Mode Setup And Functions

    1. PTZ CONTROL MODE Setup and Functions ① Setting PRESET This function allows the camera to automatically move to the designated positions and the keyboard can program up to 500 preset positions for each camera. The memorized preset position can be replaced with new preset position (new value).
  • Page 23 ① Set Swing mode (PAN) or (TILT) starting preset No. ending preset No moving speed dwell time ※ Pressing button, ‘Camera Set Function’ in red will appear at the bottom and it means “SET” mode. (Push key if you want to cancel SET mode) ※...
  • Page 24 ① Inputting GROUP Press GROUP No. Press PRESET No. Moving Speed (Preset No.~ Repeat) Dwell Time: The time that the camera stays from preset point to the next point. ※ In order to finish one GROUP and set other GROUPs, press key after you finish procedures of inputting PRESETs.
  • Page 25 There is no way to delete each GROUP respectively and all GROUPs will be deleted at a time. ④ Setting TOUR Up to 12 GROUPs can be tied in TOUR and it enables you to execute those GROUPs consecutively. ① Inputting TOUR Repeat the procedure for other GROUPs.
  • Page 26 ⑤ If you touch button when the video line is input, it will be converted to Full screen Display Mode. When each channel is touched, connecting video will be displayed When speed dome is connected, OSD menu appears (1+MENU) CCTV Receiver auto test (2+STAT) PTZ information (3+STAT) Go back to previous Menu ⑥...
  • Page 27 ③ Stop TRACE ④ Clear memorized TRACE * Please study camera manual for more details about Trace function. ⑦ Turning ON/OFF the Camera, Light Power Select a receiver (camera) you wish to ON/OFF ① Camera Power ② Light Power ③ AUX Power ※...

  • Page 28: Setup For Matrix Control Mode

    2. Setup for MATRIX CONTROL Mode ① Enter MATRIX CONTROL Touch conversion button for CONTROL MODE to change it into MATRIX CONTROL MODE. The status LED changes into ‘MAT CONTROL MAIN’ or ‘SUB’ PTZ/ Matrix set: If this is Functions touched it is converted Cameras’...
  • Page 29 If PTZ/ Matrix SET button at the right bottom is touched, a window will be created asking for Password.If correct password is input, the menu will be converted as above. ① : Entering ‘AUTO SELECT SET ‘ ② : Entering ‘ALARM/PRESET SET’ ③...

  • Page 30: Setup For Dvr Control Mode

    3. Setup for DVR CONTROL Mode ① Setup to enter DVR mode Press button at the keyboard and you will be in DVR CONTROL MODE.. Status Indicator will converted ‘DVR CONTROL’. Enter DVR OSD MENU Video will be changed into 4/ 9/ 16CH Video automatically switches or stops To enter PTZ mode Starts/ Stop Recording...
  • Page 31 Playback/ Pause at Playback mode This button is used as a function key in ‘Live view’ and ‘Enter’ in other menus or search mode Move to upper menu or cancel the command ex). In case you like to see full view of CH No.14 from DVR No 3(16CH) and change it into 16CH view. (At first, On ‘Set Camera’...

  • Page 32: Other Detailed Functions

    4) Other Detailed Functions Select Camera Press any camera number (1~255) you wish to control Select Monitor Press any monitor number (1~32) you wish to control Select DVR Press any DVR number (1~64) you wish to control 5). OSD Setup Mode 1.

  • Page 33: Other Setup Mode

    6). Other Setup Mode ① Spiral Function This function is supported only on speed dome cameras, the fixed panning speed and tilting speed are operated at the same time that can make spiral surveillance ※ This function can be used in the speed dome camera only. ②...
  • Page 34 ⑤ Converting Up/Down Convert the control of up/ down, for instance, If you move the joystick down, it will go up. ⑥ Converting Left/ Right Convert the control left/ right, for instance, if you move the joystick left, it will move right 2) ⑦...
  • Page 35 It allows the Speed dome to move to designated Preset position with Speed domes’s sensor. Preset number for each sensor can be set here. Camera Sensor Preset No. connected connected to Speed Dome to Sensor No. ⑪ Control Joystick Speed (Joystick Speed (0,1) 0=MAX) After decreasing its speed you may control the dome more precisely.
  • Page 36 On: Fan inside PTZ Camera is turned on. Off: Fan inside PTZ Camera is turned off.

  • Page 37: More Cautions And Check Points

    More Cautions and Check Points Cautions in Use Do not give a power to the unit in the process of installing. It is recommended that the unit be installed in a well-ventilated place since the operating range is 5°C~40°C. Do not expose the unit to extreme impact, which may cause serious damage. Avoid installing in the direct rays of the sun.
  • Page 38 Simple Trouble Shooting Please check out followings when you face some problems while installing or using. Problem Check Point Reference Is the connection between keyboard Make sure to connect the Modular cable. and junction box correct? (RJ45) power can’t brought. Is the Power sources being Be sure to plug the power supply into the supplied now?

  • Page 39: Dimensions

    Dimensions...

  • Page 40: System Configuration

    6. SYSTEM Configuration 1. When the keyboard is directly connected to PTZ Camera. 2. When connected with Matrix System (DMX-25632) and PTZ Camera...
  • Page 41 3. When connected with DVR- Matrix System(DMX-25632) and PTZ Camera.

  • Page 42: General Specifications

    General Specifications 1). Product Standard Classification Specification Output Signal ● RS – 422 ● RS – 485 ● Speed 9,600, 4,800, 2,400BPS, No parity, 8Bit data, 1Bit stop Communication speed ● Control Pan/Tilt /Zoom lens ● Camera power On/Off , Light power On/Off , AUX On/Off Operation ●...
  • Page 43 4). Power Supply Voltage : DC 12V (±10%) Current : 1.5A (min) 6). Constitution of pin between controller 5). CAMERA CONTROL INTERFACE and junction box(Modular Jack) ITEM Specification Pin no. Controller ↔ Junction box Asynchronous Serial Interface 1 Start bit RX-TXD Synchronization / 8 Data bit...

  • Page 44: Quick Reference

    Quick Reference Function Input Operation Function Main Keyboard [1-64] + [MON] Select Monitor ◎ ◎ Keyboard [1-512] + [CAM] Select Camera ◎ ◎ Power supply ON + [SET] Setting Controller ◎ ◎ [SET] Start Setup mode for Preset [SET]+[Joystick Stop]+[Keypad 1~128]+[PST] Run Preset, Preset movement [Preset No]+[PST] ◎...
  • Page 45 [7]+[MENU]+[ON] Run Spiral function ◎ [7]+[MENU]+[OFF] Stop Spiral function [Keypad〕 Camera Reboot ◎ [1~512]+[CAM]+[10]+[MENU]+[ENT] [20]+[MENU] Brightness Mode of LCD ◎ ◎ Joystick up/down +[CLR] Ending brightness control [11] + [MENU] + [ENT] Converting Up / Down Mode ◎ [12] + [MENU] + [ENT] Converting Left / Right Mode ◎...

Table of Contents