ROBAND HL22 Operating Instructions Manual

Heat lamp assemblies

Hide thumbs

Table Of Contents

MANUFACTURED BY

ROBAND AUSTRALIA PTY LTD

OPERATING INSTRUCTIONS

HEAT LAMP ASSEMBLIES

MODELS: HL22, HL24, HL26, HL30, HL90, HL120

& HL150

VERSION 1 UNITS

These instructions cover the models of ROBAND

Heat Lamps and Heat Lamp

Assemblies listed above. Although there are slight variances between models,

the installation, operation, care and maintenance procedure is the same for all.

Table of Contents

Need help?

Do you have a question about the HL22 and is the answer not in the manual?

Questions and answers

Summary of Contents for ROBAND HL22

Page 1 MANUFACTURED BY ROBAND AUSTRALIA PTY LTD OPERATING INSTRUCTIONS HEAT LAMP ASSEMBLIES MODELS: HL22, HL24, HL26, HL30, HL90, HL120 & HL150 VERSION 1 UNITS These instructions cover the models of ROBAND Heat Lamps and Heat Lamp ® Assemblies listed above. Although there are slight variances between models,...
Page 2 ® ® Blenders, NOAW Meat Slicers and Malavasi Cutters and Mixers. In addition to a vast range of machines, Roband Australia has its own ® line of commercial cookware and cutlery under the Robinox brand name. For a complete set of brochures please contact your nearest authorised dealer or contact Roband directly at our head office.
Page 3: Table Of Contents
CONTENTS Introduction page 4 General Precautions page 4 Packaging page 5 Compliance page 5 Installation page 6 Operation page 7 Safety page 8 Cleaning, Care & Maintenance page 9 Troubleshooting page 10 Specifications page 11 Circuit Diagrams page 12 Notes page 13 -14 Warranty page 15...
Page 4: Introduction
Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children.
Page 5: Packaging
PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging. The Package of this Heat Lamp Assemblies or Heat Lamps should include: One Heat Lamp Assembly (appropriate model)
Page 6: Installation
Look carefully at the lamp filament spirals to determine which one is broken before removing. For models HL22, HL24 & HL26 These units must be installed as pairs, wired in series and each model must only be paired with itself ie, a HL24 must be paired with another HL24.
Page 7: Operation
OPERATION After the heat lamps have been installed, the unit is operable through the use of the rocker switch. Ensure that the heat lamps have been turned on for a sufficient time before food is placed below them. This will reduce the likelihood of moisture entering into the heat lamps hence extending heat lamp life.
Page 8: Safety
SAFETY GENERAL SAFETY This machine contains no user-serviceable parts. Roband Australia, one of our agents, or a similarly qualified person(s) should carry out any and all repairs. Any repair person(s) should be instructed to read the Safety warnings within this manual before commencing work on these units.
Page 9: Cleaning, Care & Maintenance
CLEANING, CARE & MAINTENANCE Attention to regular care and maintenance will ensure long and trouble free operation of your heat lamps or heat lamp assembly. Although scheduled servicing is not required we do recommend you adopt a program of regular maintenance to ensure that the heat lamps or heat lamp assemblies are clean and functional and to avoid inadvertently damaging the unit.
Page 10: Troubleshooting
TROUBLESHOOTING If the Heat Lamp Assembly does not function check the following points before calling for service. The machine is plugged in correctly and the power switched on. The power point is not faulty. The halogen heat lamp has not failed. Page 10...
Page 11: Specifications
Nominal Dimensions Model Power Rating Power Power Length Depth - Height when Paired & Source Rating - mm - mm Wired in Series HL22 240Volts 250 Watts Watts HL24 240Volts 1000 500 Watts Watts HL26 240Volts 1500 750 Watts Watts...
Page 12: Circuit Diagrams
CIRCUIT DIAGRAM* Models: HL30, HL90, HL120, HL150 *This circuit diagram has been provided for reference and to assist qualified service and repair agents only. Under no circumstances should person’s not suitably qualified attempt repairs to any electrical equipment. Page 12...
Page 13: Notes
NOTES Record any preferred times or settings etc. here to act as a quick reference for other users. Page 13...
Page 14 NOTES Record any preferred times or settings etc. here to act as a quick reference for other users. Page 14...
Page 15: Warranty
Under no circumstances shall Roband Australia Pty Ltd or any subsidiary company or Agent be liable for loss of profit or damage to other equipment and property.
Page 16 ALSO AVAILABLE AT YOUR ROBAND DISTRIBUTOR HOT FOOD ROBINOX BARS KITCHEN & TABLEWARE TWIN DRINK VERTICAL TOASTER HIGH SPEED CONTACT GRILL MIXER VITA-MIX CURVED GLASS ECO-RAY AUTOMATIC BLENDERS FOOD BARS TOASTERS AND GRILLERS Manufactured/Imported in Australia by ROBAND AUSTRALIA PTY LTD...

This manual is also suitable for:

Hl24 Hl26 Hl30 Hl90 Hl120 Hl150