Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Bowens XMTR
- Page 1 XMTR Radio Remote and Trigger User Guide Bowens.co.uk...
- Page 2 Congratulations on purchasing your new Bowens product. Thank you for choosing the XMTR Radio Controller and Trigger. The Bowens XMTR has been designed by working closely with photographers to develop a unit that meets the exacting high standards demanded by today’s working professionals, while remaining simple and intuitive to use.
-
Page 3: Table Of Contents
Table of Contents Precautions ........4 Environmental Safety ........4 Radio Frequency ........4 Final Disposal ........4 FCC Information ........5 XMTR and Display ........6 Inserting Batteries ........7 Power On/Off ........7 Selecting and Setting Functions and Values ........7 Setting the Camera ........8 Channel Select ........8... -
Page 4: Precautions
• Always study and understand this user guide and accompanying safety instructions before using this unit. • Bowens products are intended for photographic use only and should not be used for any other purpose. • Equipment should only be serviced, modified or repaired by authorised and competent service personnel. -
Page 5: Fcc Information
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCCID: 2AI2WXMT FCC Caution: Changes or modifications not expressly approved by the part responsible for compliance could... -
Page 6: Xmtr And Display
XMTR and Display Display Screen Hotshoe Mount & Power On/Off Scroll Wheel Locking Thumb Screw Test/Open Flash Channel/Set Button AF Grid Transmitter Micro USB Group Button AF Grid Transmitter PC Sync Mode Button On/Off Group Flash Power Flash mode Channel... -
Page 7: Inserting Batteries
The display will turn on to indicator power. To turn the XMTRS off slide the Power On/Off button towards the screen. Selecting and Setting Functions and Values The following is a guide to the XMTR operations: TTL / Flash (manual) Mode BUTTON... -
Page 8: Setting The Camera
Before using the XMTR first set the cameras flash mode. In order for the XMTR to trigger compatible slave units, the cameras flash mode must be set to either Fill Flash, Auto Flash, Slow Flash or Rear-Curtain Flash. The XMTR will not trigger compatible slave units if the cameras flash mode is set to Wireless Lighting mode. -
Page 9: Turning Strobe Mode On/Off
Operation Strobe Mode (for NIKON & SONY cameras) Turning Strobe on/off: Press and hold the CHN/SET button to enter the user settings menu. Use the scroll wheel to select Multi-Flash. Press the GRP/SELECT Multi Flash options. Use the scroll wheel to select on/off. Press the CHN/SET button to confirm. - Page 10 User Settings User Settings To select and adjust user settings: Press and hold the CHN/SET button to enter the user settings menu. Use the scroll wheel to find the required option. Press the GRP/SELECT button to select required option. Active value flashes. Use the scroll wheel to select the required value / setting.
-
Page 11: Specifications
Channels Range >100m Flash Power Adjustment 1/3rd-stop Dimensions (L x W x H) 79 x 72 x 59mm / 3.1 x 2.8 x 2.3" Weight 94g / 0.2lb Compatible Cameras Canon, Nikon or Sony cameras* *Check XMTR for brand compatibility. - Page 12 Bowens International Ltd. Gilberd Court, Colchester, Essex, CO4 9WN, UNITED KINGDOM. email: info@bowens.co.uk tel: +44(0)1206 832650 Bowens.co.uk BWL0855 XMTR User Guide...