Download Print this page

Oldenbourg group Visa Lighting Serenity CB1934 Installation Instructions

Head wall

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
Model:
CB1934 HEAD WALL
Fixture Family:
SERENITY
Document Description: Installation Instructions for
Serenity Series Luminaires
TYPICAL FIXTURE
FIXTURE ASSEMBLY
#8 GROUND
SCREW
1
Remove mounting plate from fixture assembly. Save #8 ground screw for later use.
2.
Level and secure mounting plate to junction box and wall. Screws & J-box by others. Orient the plate so the continuous
flange is at the top and the two "hook" features are at the bottom.
3.
With fixture assembly upside down and two obround holes (near the center) toward the wall, hook the fixture assembly on
the temporary rest hooks. Fixture assembly will rest upside down on the hooks against the wall during electrical connections.
4.
Make electrical connections per code.
5.
Lift fixture assembly off the bottom hooks, flip fixture right side up and hang fixture assembly in place on the mounting plates
top continuous flange. Resecure #8 ground screw back into its original place. NOTE: FIXTURE ASSEMBLY SHOULD BE
ORIENTED SO THE (2) AMBIENT LED STRIPS WILL BE ON TOP AND THE (1) READING LED STRIP WILL BE ON THE
BOTTOM. NIGHT LIGHT LEDS (WHEN OPTION IS REQUESTED) WILL BE ON THE BOTTOM.
6.
Recheck for level and secure fixture to wall with auxilary mounting screws (by others).
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
Make sure all connections are in accordance with the National Electrical Code and local regulations.
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
Service should be performed by qualified personnel.
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
TEMPORARY
RESTING HOOKS
UNIVERSAL MOUNTING PLATE
SECURED TO JUNCTION BOX ON WALL
(2) AMBIENT LED STRIPS UP
(1) READING LED STRIPS DOWN
OPTIONAL NIGHT LIGHT DOWN (WHEN APPLICABLE)
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
FIXTURE ASSEMBLY,
MINUS HOUSING

Advertisement

loading

Summary of Contents for Oldenbourg group Visa Lighting Serenity CB1934

  • Page 1 INSTALLATION INSTRUCTIONS Model: CB1934 HEAD WALL 1717 West Civic Drive Milwaukee, WI 53209 Fixture Family: SERENITY 414-354-6600 Document Description: Installation Instructions for Design Modification Rights Reserved © Visa Lighting Serenity Series Luminaires TYPICAL FIXTURE UNIVERSAL MOUNTING PLATE TEMPORARY SECURED TO JUNCTION BOX ON WALL RESTING HOOKS FIXTURE ASSEMBLY, MINUS HOUSING...
  • Page 2 INSTALLATION INSTRUCTIONS Model: CB1934 HEAD WALL 1717 West Civic Drive Milwaukee, WI 53209 Fixture Family: SERENITY 414-354-6600 Document Description: Installation Instructions for Design Modification Rights Reserved © Visa Lighting Serenity Series Luminaires (2) ROWS AMBIENT LED STRIPS ORIENTED UP JUNCTION BOX (BY OTHERS) LAMP PLATE HOUSING...