Download Print this page

Kinder Valley Little Gem Rocking Stand Assembly Instructions

Download this manual

Little Gem Rocking Stand

ASSEMBLY INSTRUCTIONS

• Dimensions(mm): (L)750 x (W)410 x (H)435*

• Min/Max Moses basket base size (mm): (L)670-830 x (W)300-360*

• Easy assembly • Safe & Sturdy • Suitable to use from birth

• Rocking motion to soothe baby

*Approx. measurements only. Sizes may vary.

Need Help?

Call 0844 7744 644

or Email sales@kinder-valley.com

IMPORTANT- Read these instructions carefully

before use and keep for future reference.

Need help?

Do you have a question about the Little Gem Rocking Stand and is the answer not in the manual?

Page 1 Little Gem Rocking Stand ASSEMBLY INSTRUCTIONS • Dimensions(mm): (L)750 x (W)410 x (H)435* • Min/Max Moses basket base size (mm): (L)670-830 x (W)300-360* • Easy assembly • Safe & Sturdy • Suitable to use from birth • Rocking motion to soothe baby *Approx.
Page 2 Little Gem Rocking Stand Assembly Instructions BEFORE YOU START IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY Instructions for safe use WARNING - Do NOT attach anything to the stand that may affect its stability. WARNING - Remove all packaging materials before use.
Page 3 Step 1 Step 2 Fasten 2 legs to support bar Fasten curved base rail to legs using 2 x 30mm screws . Large using 4 x 70mm screws holes should be facing the same way. Repeat this step with the remaining Repeat this step with the remaining 2 legs and support bar...
Page 4 Step 5 Step 6 Finally, attach plastic rail to legs using the 2 x 15mm screws Attach the remaining legs Repeat this step with the remaining curved base rail to the main plastic rail . The plastic rails have structure using the remaining 6 x holes one end and 2 x holes the 2 x 30mm screws other to allow for adjustment depending...