Page 2
1. Connect the provided USB cable to your computer’s USB port, or any other USB power source. 2. While charging, a red light at the base of the CERA will illuminate. 3. The red light will turn off once fully charged.
Page 3
Audio Cable: Connect your CERA to any compatible device using the 3.5mm audio cable. Audio Cable Daisy Chain 1. Connect your device to one CERA speaker using the 3.5mm audio cable. 2. Connect an infinite number of speakers using the daisy chain mini USB/3.5mm audio cables.
Page 4
Pairing Your CERA Pairing Your CERA (cont’d) Preparing Your CERA Speaker For Pairing Turn on the CERA by pushing down Once you’ve paired the CERA with a device, the CERA will automatically on the center of the Touch Control Panel. You will hear “Power On”...
Page 5
CERA touch panel to control volume. Your CERA will Volume Down automatically open. You will hear a double tone when the minimum volume on the CERA has been reached. 3.5mm Audio Line Input USB Charging Port/Daisy Chain Port It will take approximately three hours to fully charge the CERA.
Do not use attachments not recommended by the product manufacturer. Transmission Distance: 10m/33ft • Do not dispose your CERA speaker in a fire which may cause the battery to explode; Work Frequency: 2.402-2.480GHz a battery explosion may cause severe injury or death.
FCC Statement • Do not use the CERA inside an aircraft & be sure it is turned off prior to boarding. This equipment has been tested & found to comply with the limits for a Class •...
Page 8
This device & its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: ZRCGEPBT50 8 06A The FCC identification number is located at the base of the CERA wireless speaker. COMPLIANT DO NOT dispose of unit with general waste; contains lithium polymer battery.
Need help?
Do you have a question about the CERA and is the answer not in the manual?
Questions and answers