Haier LE32G610CF Instruction Manual page 17

3). Press the ◀▶ buttons to select Antenna Type to Air
means DVB-T.
Antenna Type
Channel
Country
Mode
Picture
Start
Audio
Clock
Setup
Lock
MENU
4). In Country mode, press the ◀▶ buttons to select the
country where you will operate the TV.
5). In the Mode item, press the ◀▶ buttons to select tune
mode: ATV / DTV / DTV + ATV. Press the ▼ button to select
Start to start.
6). Channel tuning will commence. This operation may take
up to 6 minutes. The display will show the progress of the
tuning and the number of channels found.
7). If you want to skip the DTV tuning, press the MENU
button to interrupt the tuning half way. You will then go
straight toATV tuning. You may repeat the above step if
you also want to skip the ATV tuning. An installation
reminder will appear the next time you turn on the TV,
if no channel is found.
8). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select P rogramme Edit under the
channel menu.
Scanning Ch12
Channel
Digital Channels Found:
Picture
DTV: 3
Radio: 0
Audio
Data: 0
Analog Channels Found: 0
Clock
Setup
Lock
MENU
Air
Germany
DTV+ATV
Move OK OK
Move OK OK
1.2 )Auto Tuning (DVB-C)
1). Press the MENU button and then press the ▼▲
buttons to select the CHANNEL menu and then
press the OK button.
2). Press the▼▲ buttons to select Auto Tuning and
then press the OK button,select Antenna Type to cable
mean DVBC.
Antenna Type
Channel
Country
Mode
Picture
Start
Audio
Clock
Setup
Lock
MENU
3). Press the ▼ button and then press the ◀▶▼▲ buttons
to select the country you will operate the TV.
4). In the Mode menu, press the ◀▶ buttons to select ATV /
DTV / DTV + ATV.
Quick
Channel
Full
Advanced
Picture
Audio
Clock
Setup
Lock
MENU
5). Channel tuning will commence. This operation may
take up to 6 minutes. The display will show the
progress of the tuning and the number of channels
found.
6). If you want to skip the DTV tuning, press the MENU
button to interrupt the tuning half way. You will then go
straight to ATV tuning. You may repeat the above step if
you also want to skip the ATV tuning. An installation
reminder will appear the next time you turn on the TV,if no
channel is found.
7). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order or rename channels, select P rogramme
Edit under the channel menu.
Operation
Cable
Germany
DTV+ATV
Move OK OK
Move OK OK
EN-16