Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Thor Kitchen TGC Series
Summary of Contents for Thor Kitchen TGC Series
- Page 1 TGC3001&TGC3601...
-
Page 2: If The Information In This Manual Is Not Followed Exactly,A Fire Or Explosion May Result Causing Property Damage, Personal Injury, Or Death
Contents Important safety information Stainless steel surfaces W ARN I N G : If the information in this manual is not followed exactly,a fire Overview Control knobs or explosion may result causing property damage, personal injury, or Dimension and clearance Burner grates and components death. -
Page 3: Important Safety Information
Important safety information Read all instructions before using this appliance State of California Proposition 65 warning (US only) General safety ·All electrical and gas equipment with moving parts can be WARNING WARNING dangerous. Please read the important safety instructions This product contains chemicals known to the State of To reduce the risk of fire, electric shock, personal injuries, and/or death, observe the following precautions. -
Page 4: Fire Safety
Fire safety Gas safety Electrical and grounding safety WARNING WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, To reduce the risk of fire, electric shock, personal injuries, To reduce the risk of fire, electric shock, personal injuries, and/or death, observe the following precautions. and/or death, observe the following precautions. -
Page 5: Installation Safety
Installation safety Location safety Cooktop safety WARNING WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, observe the following precautions. To reduce the risk of fire, electric shock, personal injuries, To reduce the risk of fire, electric shock, personal injuries, and/or death, observe the following precautions. - Page 6 Overview ·Before removing or changing cookware, turn off the burners. Dimension and clearance ·Remove food and cookware immediately after cooking. 30" /36”Model:TGC3001/TGC3601 ·Before removing any parts of the burner for cleaning, make sure the cooktop is off and completely cool. ·After cleaning the burner spreader, make sure it is completely dry before re-assembling.
-
Page 7: Circuit Diagram
TGC3001Circuit Diagram LED1 Right Front LED5 Left Front LED3 HW-ZB-1460-01 Right Rear LED Power board 100 X 60mm LED4 Left Rear 18" 2.5" ( 457m m ) 30"Min (63.5mm) (762 mm) 2.5" 63.5mm 24" INPUT:AC 120 V COS1 BLACK (L) WHITE(N) GREEN(PE) Plug AC Male... - Page 8 TGC3601 Circuit Diagram What’s included LED6 Right Front LED5 Middle Front LED4 HW-ZB-1460-01 Left Front LED Power board 100 X 60mm LED3 Right Rear LED2 Middle Rear LED1 Left Rear TGC3001 Surface TGC3601 Surface INPUT:AC 120 V COS1 BLACK (L) burner grates (2) burner grates (3) WHITE(N)
-
Page 9: Electrical Requirements
·Flames larger than the cookware bottom may result in a fire or 1.Your cooktop equip with an automatic ignition system and physical injury. Thor Kitchen Gas cooktop requires 110 volts, 50/60 Hz then turn anticlockwise to the ignite position,push in the control Ignition ·After turning on a surface burner, make sure that the burner has... - Page 10 Cookware Requirements Install the grates Wok Ring Care and cleaning of the cooktop ·Flat bottom and straight sides Woks are often used for stir frying, pan frying, deep frying, Install the grates as instructed below for longest life. ·Tight-fitting lid and poaching.
-
Page 11: Stainless Steel Surfaces
Burner grates and components Burner caps and heads Stainless steel surfaces Control knobs Make sure all surface burner knobs are in OFF position. 1. Do not remove any spills, spots, and grease stains using Turn off all surface burners and make sure they have NOTE a soft, wet cloth until surface is cool. - Page 12 Burner bases Burner head and cap replacement Burner cap Round Burner head CAUTION NOTE 1. Match the burner caps to the burners by size, and then re-install the caps on the burner heads. The burner bases cannot be removed for cleaning. Make sure Do not attempt to remove the electrode from the cooktop.
-
Page 13: Troubleshooting
Troubleshooting Gas Cooktop Conversion WARNING This conversion kit must be installed by a qualified service technician in accordance with the manufacturer's instructions and all applicable codes and requirements of the authority having The cooktop is set for use with Natural Gas (NG).The factory setting If you encounter a problem with the cooktop, check the tables starting jurisdiction. - Page 14 IMPORTANT: After replacing the natural gas to LP orifices, be sure to 2.Convert Burner for LP/ Propane Gas keep the original factory installed natural gas orifices for future range Save the natural gas orifices removed from the appliance for possible conversion future conversions to natural gas.
- Page 15 3.Convert Burner Valves for LP/Propane Gas 4. Reconnect Gas and Electrical Supply to Cooktop. 5. Installation of New LP / Propane Rating / Serial Plate Leak testing of the appliance shall be conducted according to the Record the model and serial number on the LP / Propane Rating installation instructions provided with the cooktop.
-
Page 16: Warranty
4). Products purchased “as-is” are not covered by this warranty; Please rest assured that under no conditions will Thor Kitchen sell your name user or operator instructions and/or installation instructions.
Need help?
Do you have a question about the TGC Series and is the answer not in the manual?
Questions and answers