Panasonic DMR-EZ27P Service Manual page 15

Table of Contents

Advertisement

Error Code
Diagnosis contents
F34
Initialization error when main
microprocessor is started up
for program recording
HDMI
HDMI connection check
F74
HDIM
Device
Communication error.
F75
HDIM Device Key Information
error
UNSUPPO
Unsupported disc error
RT
NO READ Disc read error
HARD
Drive error
ERR
No REC
Recording is impossible
SELF
Restoration operation
CHECK
PLEASE
Unit is in termination process
WAIT
UNFORM
Unformatted disc error
AT
Description
When initialization error is detected after
starting up main microprocessor for program
recording,
the
power
automatically.
The event is saved in memory.
This unit is confirming that ut is connected
with equipment
compatible
control.
Key
HDMI connection could not be authenticated
due to a transfer malfunction.
Factor of HDMI Device key-road failure
· When HDMI LSI is damaged.
· When the bus line of I2C doesn´t operate
normally.
· When device key information recorded is
damaged.
HDMI connection could not be authenticated
due to an internal data malfunction.
Factor of HDMI Device key-road failure
· When HDMI LSI is damaged.
· When the bus line of I2C doesn´t operate
normally.
· When device key information recorded is
damaged.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
[No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It
will
OK,
if
a
display
automatically. If a display does not disappear,
there is the possibility that defective Digital
P.C.B.
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
Monitor Display
No display
is
turned
off
No display
with HDAVI
No display
No display
"This
disc
incompatible."
"Cannot
Please check the
disc."
"DVD drive error."
No display
No display
disappears
No display
15
DMR-EZ27P / DMR-EZ27PC
Automatic FL display
No display
is
Display for 5 seconds.
read.
Display for 5 seconds.
"0" is displayed one by one.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr-ez27pc

Table of Contents