2. An active internet connection 3. The Flic app, available on the App Store or Google Play For more information on setting up your Flic for the first time and to see instructional videos go to https://start.flic.io/ *Device compatibility is subject to change.
Pairing your Flic 1. Make sure Bluetooth is 2. Open the Flic app, create activated on your phone. an account and login. 3. Follow the interactive app 4. Now you are ready to guide to get your Flic set up your first actions.
Always keep your Bluetooth turned on to ensure your Flic stays connected with your device. Bluetooth works within range of up to 50m. Make sure your Flic stays close to your device to ensure a stable connection. Flic uses Bluetooth Low Energy (BLE) which is specifically designed for low power consumption.
*The adhesive is strong! We advise caution when choosing where you stick it. **When removing your Flic we advise that you peel, rather than pull, the adhesive else you may need to use considerable force which could cause damage to the surface.
Cleaning the reusable adhesive To clean your adhesive, remove it from the Flic’s base and rinse with water. Give it a rub and rinse again. Do not apply solvents, chemicals or abrasive cleaning products as this will damage the adhesive.
Using the clip accessory Not all powered by Flic products come with a clip. These can be purchased seperately from our webstore. To attach your clip simply hold the tongue of the clip slightly open and slide your Flic in from the bottom.
Problems? If you are unable to connect your Flic or have any other issues then please read our FAQ’s. They can be found at https://start.flic.io/faq Alternatively you can contact us via the in-app customer support or email us at support@shortcutlabs.com...
Page 11
Shortcut Labs AB Disclaimer This contains important information regarding device set up, product compliance, safety and warranty information. Flic and Shortcut Labs are trademarks of Shortcut Labs AB 2017. All other trademarks and logos are properties of their respective owners.
Compliance Shortcut Labs declaration of conformity is available at https://flic.io/doc For a full compliance list visit https://flic.io/compliance Flic is certified as FCC, IC, CE, TELEC, WEEE, RoHS, REACH, AUS and R-NZ compliant. R-NZ...
• Do not use the product in temperatures below -20 degrees Celsius or above +54 degrees Celsius. • Flic is rated as splash proof only - IP54. Do not submerge or attempt to use underwater as this will result in irreversible damage that is outside the scope of the Shortcut Labs AB warranty.
Battery warning This device contains a battery composed of lithium, organic solvents, and other combustible materials. For this reason, improper handling of the battery could lead to distortion, leakage, overheating, explosion or fire, causing personal injury. Please observe the following instructions to prevent accidents. Never swallow, charge, heat, expose to open flames, moisture, liquid.
Warranty Shortcut Labs AB warrants that your Flic hardware product (“the product”) will be free from defects in materials and workmanship for a period of 24 months from the date of delivery to the original retail purchaser (“the warranty period”).
Page 16
Join the Flic community! https://community.flic.io/ Share your ideas with other Flic users and keep up to date with the latest news and happenings from the Flic team. SHORTCUT SWEDEN...