customer service. Name of Parts Qty Remarks Main Unit 1 Power Cord 1 4” Hose 1 Top Cotton One installed, 4 spares 5 PreFilter included. HEPA Middle Filter 1 Installed in main unit Activated Carbon 1 Installed in main unit Lower Filter Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
2 Unit Components 4. Specifications Model F SL100 Specifications Air Inlet Size 4” duct Input Voltage AC110V Maximum Power 200W Noise < 60dB Typical Flow Rate 210 CFM Dimensions 17” x 10” x 16” Weight 31 lbs Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Page 4
end to your Full Spectrum Laser machine’s outlet duct. Do not introduce a bend radius of more than 10” on the hose. Machine Operating Instructions Plug in and check if the power plug is properly fit into the socket. Turn on the power switch. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Page 5
Flow Button Press this button when the machine is running, the number on digital display decreases in multiples of 10. Proper Fan Speed The fan speed should be set according to the actual requirements to remove all smoke without creating too much of a vacuum. During laser cutting, the laser machine should not fill up with smoke. If there is lingering smoke during cutting increase the fan speed. Too high a setting may cause the work piece to lift up and be pulled toward the vacuum created. In addition, too high a fan speed increases the power consumption as well as the noise level. Time Set Button Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Page 6
status, press the Confirm/Set button to check the total working hours of the machine. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
The fuse needs to be replaced. Pop the fuse out from the power socket using a flat head screwdriver and replace. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Page 8
7 If the problem remains after these inspections and maintenance are performed, please contact customer service. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Page 9
When cleaning does not help replace the Middle HEPA Filter with a new one. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Page 10
If there is good airflow but the odors are not removed, the Activated Carbon Filter is consumed and must be replaced. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
operation without all filter elements installed is not covered under warranty. Use only OEM replacement filter elements from Full Spectrum Laser. Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
proper machine operation. The warranty will not cover any losses or damage that may be incurred by the user if instructions are not followed. Contact Information Full Spectrum Laser LLC 6216 S Sandhill Rd, Las Vegas, NV 89120 Tel: (702) 8023100 Fax: (702) 9870150 http://fslaser.com/Support Full Spectrum Laser FSL100 User Manual, 2016, Rev.A ...
Need help?
Do you have a question about the FSL100 and is the answer not in the manual?
Questions and answers