Subscribe to Our Youtube Channel
Related Manuals for Spearhead Quadsaw LRS 1402
Summary of Contents for Spearhead Quadsaw LRS 1402
- Page 1 8999127: v1 14/08/2018 QUADSAW LRS 1402 Page 1.1 of 1.10 pages Original instructions (ENGLISH) Website: www.spearheadmachinery.com...
- Page 2 The information given throughout this manual is correct at the time of publication. However, in the course of constant development of Spearhead machines, changes in specification are inevitable. Should you find the information given in this book to be at variance with the machine in your possession, you are advised to contact the Spearhead Service department where up-to-date information will be provided.
- Page 3 8999127: v1 14/08/2018 This machine is produced by GreenTec.Eu on behalf of Spearhead Machinery Limited. EU DECLARATION OF CONFORMITY Adaptive EEC Directive EG Guideline 2006/42/EF, 89/392/EEC & 98/37/EC GreenTec A/S, Merkurvej 25, 6000 Kolding. Hereby declare that in terms of its design, method of construction and our execution thereof, the item of machinery described below complies with the basic health and safety regulations of the respective EU Directives.
- Page 4 It is also important to follow that which is described in this manual since Spearhead declines any liability resulting from negligence of from not observing these norms, since it would result in the warranty being annulled.
-
Page 5: Table Of Contents
8999127: v1 14/08/2018 Contents List Machine Description ..........................7 Intended Usage ......................... 7 1.1.1 Allowed Uses ....................... 7 1.1.2 Improper Uses ......................7 General Arrangement ....................... 8 Identification ..........................9 Machine general specification....................9 Sound Level ..........................9 EC marking of the Quadsaw ....................10 Safety .............................. - Page 6 8999127: v1 14/08/2018 Page 1.6 of 1.10 pages Original instructions (ENGLISH) Website: www.spearheadmachinery.com...
-
Page 7: Machine Description
The Quadsaw must not be used for purposes other than those described in this manual. DANGER! Spearhead declines any and all liability for damages caused by the Quadsaw to persons, animals or property, resulting from use other than that described in this manual, or due to damage caused by negligence or by not observing the instructions contained in this manual. -
Page 8: General Arrangement
8999127: v1 14/08/2018 General Arrangement With reference to Figure 1.2, the Quadsaw is a machine designed and built exclusively for cutting branches and trees. It must not be used for other uses or with other materials. The Quadsaw consists of the following parts: Saw Blade Deck Cover Plate Branch Deflector... -
Page 9: Identification
Twiga 320 350 PTO rpm Notes: (1) Spearhead constantly reviews and improves product designs and reserve the right to change this information. Actual machines may vary from the above specification. Contact your Spearhead Sales representative if you have any queries. -
Page 10: Ec Marking Of The Quadsaw
8999127: v1 14/08/2018 The test has been done in a distance of 1 metre from the machines critical noise maker and in a height of 1.5 metres over the ground. EC marking of the Quadsaw Directive 2006/42/EF specifies the minimum conditions with which a machine can be placed on the EU market. All machines can only be marketed and put into service if the health and safety of persons, domestic animals or property are not affected. -
Page 11: Safety
- even severe - to people or animals. Spearhead declines all responsibility for damage caused by not complying with the safety and injury prevention regulations described below. Spearhead also declines any responsibility for damage caused by improper use of the machine and/or as a result of modifications made without authorisation by the manufacturer. -
Page 12: Safety Decals
8999127: v1 14/08/2018 Safety Decals The Quadsaw is equipped with safety decals warning about residual risks present on the machine that were not possible to eliminate. Figure 2.1 specifies the meaning of symbols contained in the decals. The operator must memorise the meaning of these decals. -
Page 13: Personal Protective Equipment
8999127: v1 14/08/2018 Personal Protective Equipment In general it is necessary to wear suitable clothing for the work to be carried out. In particular, as far as saw blading use, obey the following provisions: - It is mandatory to use clothing which is as suitable as possible, meaning not too loose and without any protruding or moving parts (for example ties or necklaces). -
Page 14: Safe Use
8999127: v1 14/08/2018 Safe use - It is prohibited to use the Quadsaw in ways that are different from the indications contained in Section 1.1 “Intended use”. - It is prohibited to use or have the Quadsaw used by anyone who has not read and completely understood the information contained in this manual. -
Page 15: Safe Maintenance
8999127: v1 14/08/2018 - It is mandatory for maintenance on the Quadsaw to only be performed by skilled and specialized personnel, in strict compliance with the instructions in this manual, and any worn or damaged parts should be replaced. - It is mandatory to always use original spare parts when carrying out repairs and maintenance. - It is mandatory to store the Quadsaw in a safe place which is protected from the elements, when the work is completed. -
Page 17: Machine Preparation
Do not touch the Quadsaw and do not stop within the operating range of the crane. After transportation, check that the machine was not damaged in any way. Spearhead cannot be held responsible for any damage caused by handling carried out any differently from that described in the manual. -
Page 18: First Use
DANGER! Spearhead cannot be held liable for damage to persons, animals or property, caused by non- compliance with the safety and accident prevention regulations or operations which do not conform to the information provided in the user and installation instructions. - Page 19 8999127: v1 14/08/2018 3.2.2.3 Fit the bolts, flat washers and Nylock nuts and tighten. For Quick Release Mounting 3.2.2.4 Use appropriate protective gloves align the reach arm mounting face to the Quadsaw with an aim at lining up the mounting plate and slot. Ensure the blade is mounted, so the direction of rotation of the saw goes down 3.2.2.5 Switch the tractor off and engage the parking brake.
-
Page 21: Usage Instructions
8999127: v1 14/08/2018 Usage Instructions Before use Prior to starting up the Quadsaw, carry out the following operations; 4.1.1. Check that all the screws and nuts are fastened, especially those that secure the blades. For torque setting see Section 5.1.3; 4.1.2. -
Page 22: After Use
Ensure that the blade protection is in place. 4.4.4.2 Place the Quadsaw on level ground by manoeuvring the tractor with the reach arm/carrier frame. Spearhead ideally recommends that the Quadsaw is stored on a suitable pallet when not in use. -
Page 23: Safety Devices
8999127: v1 14/08/2018 4.4.4.6 Ensuring the Quadsaw is stable and level on the pallet go about removing the nuts and bolts or split pin, depending on whether the machine is standard attachment or fitted with the optional quick release set-up. A reverse of Figure 3.4 4.4.4.7 Climb into the driver’s seat of the tractor, start up and gently move the reach arm away from the Quadsaw. -
Page 25: Maintenance
8999127: v1 14/08/2018 Maintenance Routine maintenance operations are listed below. Extraordinary maintenance operations (repairs of parts or components) can be carried out by specialised personnel authorised by the manufacturer. WARNING! The schedule is for information purposes only and depends on normal operation conditions. Conditions can in fact change depending on the service, the environment and on frequency of use. -
Page 26: Belt Maintenance
8999127: v1 14/08/2018 5.1.2 Belt maintenance It is of utmost importance that the belts are correctly mounted and tightened. When new belts are mounted they must be tensioned to 370 Nm. See Figure 5.1, for guidance on left-hand and right-hand build machines. After 3-5 working hours the belts may have slackened and must be checked. -
Page 27: Torque Settings
8999127: v1 14/08/2018 5.1.2.4 Adjust to the correct tension as directed in Figure 5.1 (370/330 Nm); 5.1.2.4.1 Position the OPTIKRIK I on one of the belts in the middle of a length as shown in Figure 5.5. Take care to ensure that the indicator arm is pushed down into the gauge body. -
Page 29: Troubleshooting
Replace the blade Tool is turned so that the rotor is Only operate as recommended by Cuttings are thrown towards the cab facing the cab Spearhead Machinery A rotor stops Belt tension incorrect Adjust to correct tension Page 6.1 of 6.1 pages Original instructions (ENGLISH) Website: www.spearheadmachinery.com... -
Page 31: Spare Parts
For routine maintenance or repair spare parts may be obtained from the Spearhead parts department. To obtain correct part numbers; refer to the Spearhead on-line parts books. This is available at dealerinside.spearheadmachinery.com/partsmanuals/manual.aspx. You will need to enter the machine serial number. -
Page 33: Warranty Information
12 months, unless a different period is specified. All spare parts supplied by Spearhead and purchased by the end user are warranted to be free from defects in material and workmanship from the date of sale to the original purchaser for a period of 6 months. All parts warranty claims must be supported by a copy of the failed part invoice to the end user. -
Page 34: 8.1.3 Remedies And Procedures
Any fault must be reported to an authorised Spearhead dealer as soon as it occurs. Continued use of a machine, after a fault has occurred, can result in further component failure for which Spearhead cannot be held liable. -
Page 35: How To Make A Claim
In the event of a warranty claim being made, the process of making a claim will be carried out entirely by your selling agent. This is an arrangement that exists between Spearhead Ltd and its agents. All claims will be made via the Spearhead web site. - Page 36 8999127: v1 14/08/2018 Page 9.2 of 9.1 pages Original instructions (ENGLISH) Website: www.spearheadmachinery.com...
Need help?
Do you have a question about the Quadsaw LRS 1402 and is the answer not in the manual?
Questions and answers