Master equipment SuperDry TP2401 Assembly Instructions

Parts List:
A. Top Pole (1)
B. Bottom Pole (1)
C. Base With Wheels/Brakes (1)
D. Base With Wheels/Brakes (1)
E. Small Round Washer (1)
F. Large Round Washer (1)
G. Twist Bolt (1)
H. Dryer Body (1)
1. Connect the base of the dryer stand by attaching the two bases with
wheels and brakes together in an "X" shape. Attach the bottom pole (B)
to the "X" base using the twist bolt (G), and washers (E &F).
Tighten as needed.
3. Slide the bottom of the dryer body (H) into the top pole (A). Secure the dryer
body and top pole together by tightening the knob on the top pole.
TP2401 SuperDry Stand Dryer Assembly Instructions
A
E
F
G
B C D
2. Slide the top pole (A) into the bottom pole (B).
Secure using the tightening knob on the bottom
pole (B).
H