Control Panel - AEG DK 4460 User Manual

Control Panel

• Best results are obtained by using a low speed for normal conditions
and a high speed when odours are more concentrated.
Turn the hood on a few minutes before you start cooking.
The hood should be left on after cooking for about 15 minutes or until
all the odours have disappeared.
• The cooker hood is fitted with a sensor which, in the event of ex-
treme variations in temperature, switches the appliance on automati-
cally until the temperature of the environment surrounding the hood
has been significantly reduced.
• The control switches are located on the unit's front panel:
1 Motor ON/OFF button
By pressing the button, the hood starts at speed 1.
Pressing the button (OFF) while the hood is in function turns the
latter off.
2 Speed increase button
By pressing the button, the hood starts at speed 1.
Pressing the button (while the hood is on) modifies the motor speed:
Speed 1: the number "1" appears on the display
Speed 2: the number "2" appears on the display
Speed 3: the number "3" appears on the display
High-speed: the number "4" appears (flashing) on the display
The high-speed function is regulated by a timer. The standard time
setting is 5', at the end of which the hood adjusts to speed 2.
Press button 2 to deactivate this function before the set time expires;
the hood will adjust to speed 1. Press button 1 to turn the hood off.
3 Lights ON/OFF button
4 Speed timer button
5 Display
1 2 5 3 4
59