Sapphire Audio SSM-BR Instruction Manual For Ceiling Installation Parts

7. If the ceiling where you install the parts is not a flat Concrete Ceiling, then extra a mounting rack is necessary, Figure 8-9.
Iron Plate
(250x175x8mm)
Iron Plate
Iron Square
weld tight
Tube Beam
with Iron
Square
Tube Beam
Right side Ceiling
Left side Ceiling
Installation Part
Installation Part
8. Please ensure all parts are mounted security before install screen.
9. For Skyshow screen installation pls refer to 'Instruction Manual for Smartmove series Motorized Screen.
10. Adjust screen to flat level, recheck the hanging distance to ensure straps are plumbness.
3
11. Connect and fix the power cable and network cable.
DISTANCE P1 MUST BE EXACTLY THE SAME AS P,
OTHERWISE IT MIGHT CAUSE PRODUCT FUNCTIONAL FAIL OR DAMAGE.
Warning
P1
P
P1=P
Correct Installation
AFTER INSTALLATION, DO NOT CONNECT ELECTRIC POWER UNTIL ENSURE THE WHOLE SCREEN
IS AT THE SAME HORIZONTAL LINE AND FIXED STICKERS OF THE SCREEN BOTTOM BAR HAS
Warning
BEEN REMOVED. OTHERWISE IT MIGHT CAUSE PRODUCT FUNCTIONAL FAIL OR DAMAGE.
Screen Flat
Correct Installation
Techical Assistance
If you need help with installing this screen please visit
www.sapphireav.com
Pd = P - 80
35 180
M10x80mm
Screw
Flat Washer
250
Spring Washer
Screw Nut
The minimum cross section
Iron Plate weld tight with
of Iron Square Tube Beam
Iron Square Tube Beam
is 60x40x2mm
Figure 8
P1 P1
P P
P1>P P1<P
Wrong Installation Wrong Installation
Screen lean Screen lean
to the left to the left
Wrong Installation Wrong Installation
Figure 9
Constraint
Constraint
Apply to Viewing Size Range 136''(16:9) to 240''(4:3) of Smartmove series Motorized Screen
Before using, please read instructions carefully. After installation, store instructions for future reference.
Instruction Manual for Ceiling Installation Parts
Thank you for purchasing a Sapphire product.