Download Print this page

Lena Lighting Mustang LED Installation Instructions

Advertisement

Quick Links

PL
ZASTOSOWANIE I FUNKCJE OPRAWY:
1) Oprawa posiada pojemną baterię, która jest przyjazna dla środowiska oraz przeznaczona do wielokrotnego ładowania.
2) Produkt ma ciekawy design, jest łatwy w obsłudze, charakteryzuje się długą żywotnością i czasem świecenia.
3) Oprawa przeznaczona do pracy w warsztacie samochodowym lub na zewnątrz budynku.
4) Regulacja mocy / śiły świecenia lampki za pomocą wbudowanego regulatora. Przekręć pokrętło w prawo aby włączyć lampkę.
Dalsze obracnie w prawo - większa moc lampki, w lewo - słabsza moc. Przekręcenie do końca w lewo - wyłączenie lampki.
ŚRODKI OSTROŻNOŚCI
Proszę nie używać oprawy w najbliższym otoczeniu łatwopalnych materiałów oraz gazów. Upewnij się, że element oświetlenia
nie jest okryty matą izolacyjną lub podobnym materiałem. Używaj wyłącznie ładowarek dołączonych do produktu.
Trzymaj oprawę z dala od nieupoważnionych osób, przede wszystkim dzieci. Nie wolno świecić sobie ani innym osobom prosto
w oczy. Zakaz dotyczy również zwierząt. Zawsze przed ładowaniem sprawdzaj przewód zasilający. Jeżeli jest uszkodzony należy
niezwłocznie wymienić ładowarkę.
DANE TECHNICZNE
Szczelność: IP40
ź
ź
3.7V bateria wielokrotnego ładowania Li-ion 5200mAH
ź
Panel roboczy: SMD LED
Czas użycia: od 24H do 1,5H na 1 ładowanie
ź
(w zależności
od ustawionej mocy świecenia lampki)
Czas ładowania 4,5 godziny
ź
Klasa ochrony: III
ź
Zasilacz: wejście 110-240V 50/60Hz / wyjście 5V 2A
ź
ź
Proszę zwrócić uwagę na magnes gdyż może on
przyciągać metalowe, żelazne elementy.
EN
FUNCTION AND USE:
1) This product uses high-powered rechargeable, environment-friendly, non-memory Li-battery.
2) This product has the characteristics of novel design, easy to take, high brightness, long-distance visualization,
long life and long working time.
3) It can be used in the palces of auto maintenance, long journey, outside working, field exploration, field searching,
ideal to be as household lighting, traveling necessity etc.
4) Power output regulation / lighting intensity by means of a built-in regulator. Turn right the knob clockwise to power on. Further
turning to the right - more power of the lamp, to the left - weaker power. Turning it all the way to the left - turning off the lamp.
SAFETY PRECAUTIONS:
Do not use the lamp in the immediate vicinity of inflammable materials or gases. Make sure that the illuminants are not covered
during use. Only use the accessories included with the product for recharging your rechargeable workshop lamp. Keep the lamp out
of reach of unauthorised persons, especially children. Do not point the light directly in your own or any other person's or animal's
eyes. Always check the mains cable before you use the charger. If the mains cable is damaged, replace the charger.
TECHNICAL DATA
ź
Ingress protection class: IP40
ź
3.7V rechargeable battery Li-ion 5200mAH
Working panel: SMD LED
ź
Usage period: Form 24H to 1,5H on one charge
ź
on the power setting of the lamp)
Charging period: 4,5h
ź
Protecion class: III
ź
ź
Power supply: input 110-240V 50/60Hz / output 5V 2A
Comes to pay tribute the magnet, may adsorb on the
ź
iron/metal hardware
LENA LIGHTING S.A.
ul.Kórnicka 52
63-000 Środa Wlkp.
4
ŁADOWANIE PRZY POMOCY ŁADOWARKI NA 230V:
Umieść odpowiednią wtyczkę do standardowego kontaktu
na 230V. Następnie podepnij odpowiednią wtyczkę zasilacza
do gniazdka w oprawie (uchwyt). W czasie ładowania
powinna świecić się czerwona dioda na zasilaczu. Gdy
bateria się naładuje zapali się zielona dioda.
CHARGING USING THE 100-240V MAINS UNIT:
Plug the power supply into an ordinary 100-240V AC mains
power socket. Plug the charger cable into the corresponding
socket on the handgrip. On the charger the red LED will light
up during the charge. Once the batteries are completely
(depending
charged,the LED turns green.
tel. +48 61 28 60 300
fax. +48 61 28 54 059
www.lenalighting.pl
INSTALLATION INSTRUCTION
EN
RU
Data aktualizacji/
Date of update: 08.08.2018
INSTRUKCJA MONTAŻU
PL
INSTRUCTIONS DE MONTAGE
ИНСТРУКЦИИ ПО УСТАНОВКЕ
FR
MUSTANG LED
230 V
LED
IP40
50 Hz
MONTAGEANLEITUNG
DE

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mustang LED and is the answer not in the manual?

Questions and answers

Summary of Contents for Lena Lighting Mustang LED

  • Page 1 Plug the power supply into an ordinary 100-240V AC mains ź 3.7V rechargeable battery Li-ion 5200mAH power socket. Plug the charger cable into the corresponding MUSTANG LED Working panel: SMD LED socket on the handgrip. On the charger the red LED will light ź...
  • Page 2 IN SET / W ZESTAWIE LIGHT POWER ON POWER BUTTON ADJUSTMENT / REGULACJA ADJUSTMENT / REGULACJA +/- 90 POWER OFF 60 lm 1000 lm SLING / HACZYK MAGNET / MAGNES MAGNET MUSTANG LED - INSTALLATION INSTRUCTION MUSTANG LED - INSTALLATION INSTRUCTION...