Summary of Contents for Snow Gear VIBE FX Party Bar Set V1
- Page 1 MANUAL ENGLISH VIBE FX Party Bar Set Ordercode: 950000 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
VIBE FX Party Bar Set Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains ............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Overview .................................. -
Page 3: Warning
VIBE FX Party Bar Set Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. - Page 4 VIBE FX Party Bar Set Before the initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device. To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes contained in this manual.
-
Page 5: Operating Determinations
VIBE FX Party Bar Set ● This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth. ● Repairs, servicing and electric connection must be carried out by a qualified technician. ● WARRANTY: Till one year after date of purchase. Operating Determinations ●... -
Page 6: Connection With The Mains
VIBE FX Party Bar Set The VIBE FX Party Bar Set can be mounted to a tripod or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. -
Page 7: Return Procedure
VIBE FX Party Bar Set Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture. -
Page 8: Description Of The Device
VIBE FX Party Bar Set Description of the device Features The VIBE FX Party Bar Set is a lightset with high output and great effects. It can be controlled by DMX or by the foot controller which is included. ● Included 2 carrying bags ●... -
Page 9: Overview
VIBE FX Party Bar Set Overview Fig. 01 01) 4 x 81 RGB LEDs 120mw (27x Red, 27x Green, 27x Blue per par) 02) IEC power connector 100-240V IN + Fuse T2L/250V 03) 3-pin DMX signal connector IN 04) 3-pin DMX signal connector OUT 05) Sound sensitivity control 06) Built-in microphone 07) 4-digit LED display + control buttons... -
Page 10: One Party Bar (Auto, Manual)
VIBE FX Party Bar Set There are 5 modes: ● Auto Mode ● Manual Mode (Static Color Mode) ● Sound-controlled ● Master/Slave ● DMX512 (3CH or 15CH) One Party Bar (Auto, Manual) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). -
Page 11: Multiple Party Bar Sets (Dmx Control)
VIBE FX Party Bar Set Multiple Party Bar Sets (DMX Control) 01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 12: Fixture Linking
VIBE FX Party Bar Set Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 13: Control Panel
VIBE FX Party Bar Set Control Panel A) LED display Menu button C) Up button D) Down button Enter button Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller (when you select the DMX address and save it, the controller will display the saved DMX address the next time). -
Page 14: Menu Overview
VIBE FX Party Bar Set Menu Overview Main Menu Options DMX Address Auto Mode Manual Mode (Static Color Mode) Sound-controlled DMX-512 Mode 1. DMX Address With this menu you can set the desired DMX Address. 01) Press the MENU button on the device, until the display shows 02) Press the ENTER button to open this menu. -
Page 15: Auto Mode
VIBE FX Party Bar Set 2. Auto Mode With this menu you can choose one of the built-in programs. 01) Press the MENU button on the device, until the display shows 02) Press the ENTER button to open this menu. 03) Press the UP/DOWN buttons to choose one of the 12 built-in programs ( 04) Once you have chosen the desired built-in program, press the ENTER button again. -
Page 16: Foot Controller Functions (Foot Controller Included!)
VIBE FX Party Bar Set 6. Foot controller Functions (foot controller included!) 01) Connect the foot controller to the bar via the input connector (8). 02) The foot controller has two pedals, Black Out and Programs. 03) Step on the Black Out pedal to black out the bar, the display will show “OFF”. 04) Step once again on the Black Out pedal and the bar will light up again. - Page 17 VIBE FX Party Bar Set Channel 2 – Dimmer 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 3 –Strobe (CH1 must be set between 0-9 and CH4-CH15 between 0-255 0-15 No function 16-255 Strobe frequency, from slow to fast Channel 3 –Speed Built-in programs (CH1 must be set between 10-249 0-15 No function...
-
Page 18: Maintenance
VIBE FX Party Bar Set Maintenance The operator has to make sure that safety-related and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-related and machine-technical installations are to be inspected by a skilled person once a year. - Page 19 VIBE FX Party Bar Set Problem Probable cause(s) Solution No power to the fixture • Check if power is switched on and One or more cables are plugged in fixtures do not function at all Primary fuse blown • Replace fuse Fixtures reset The controller is not connected.
-
Page 20: Product Specifications
VIBE FX Party Bar Set Product Specifications Model: Showgear VIBE FX Party Bar Set Input Voltage: 100-240V AC 50/60Hz Power consumption: Fuse: T2L/250V Dimensions: 880 x 235 x 45 mm excl. tripod (LxWxH) Weight: 3,7 kg (excl. tripod) Operation and Programming: Setup and Addressing: 4-digit LED display for easy setup DMX modes:... -
Page 21: Dimensions
VIBE FX Party Bar Set Dimensions Ordercode: 950000... -
Page 22: Notes
VIBE FX Party Bar Set Notes Ordercode: 950000... - Page 23 VIBE FX Party Bar Set Ordercode: 950000...
- Page 24 ©2017 Showgear...
Need help?
Do you have a question about the VIBE FX Party Bar Set V1 and is the answer not in the manual?
Questions and answers