Grandstream Networks GUV3100 Quick Installation Manual page 3

On desk/tripod:
The GUV3100 can be installed on desk/tripod directly using its Built-in
bracket by following the steps below :
1. Keep the rotating bracket under the main unit closed, as shown in the
following figure.
2. Position the unit on desk or screw the camera onto the tripod using
the threaded hole in the bottom of the GUV3100 bracket.
Note: Tripod is not provided in the package.
CONNECTING AND USING THE GUV3100:
After installing the GUV3100:
1. Connect the USB cable with computer, video conference devices or
other USB input device.
2. Open the video software and select the video device to get video
output.
The GNU GPL license terms can be accessed here:
http://www.grandstream.com/legal/open-source-software
To obtain a CD with GPL source code information please submit a
written request to info@grandstream.com
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
~ 3 ~
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
CAN ICES-3 (B)/NMB-3(B)
~ 4 ~