Table of Contents
Advertisement
Quick Links
E N G L I S H
SINGLE FAMILY VIDEO INTERCOM SYSTEM
FEATURES
■
OPTIONAL TOUCH SCREEN AND COLOR MEMO FUNCTIONS
■
15 CHORD TUNES SELECTABLE, INTERCOM FUNCTION
■
EXPANDING UP TO 2~4 OUTDOOR STATIONS AND 5 MONITORS
VT693 SERIES MONITOR
VT-ENG-693MT-V1-2293 080502
1.
MONITOR PARTS AND FUNCTIONS
Right View
IN USE
MESG
MONITOR
UNLOCK
CALL
TALK
Menu
MENU
Buttons
1. TALK Button
2. INTERCOM Button
3. Speaker
4. UNLOCK Button
5. Menu Buttons
Up/+, Down/- ( /
Buttons)
Left, Right ( /
Buttons)
Accessory fittings: Bracket (Two 4X25 screws are needed for fastening the Mounting
Bracket), Special 4 core cables to connect with Monitor.
Installation steps: Installation height of Indoor Monitor, usually from 145 to 160CM, then
fix the bracket on 86 Installation Box or wall surface directly, then install the Monitor.
The design and specifications can be changed without notice to the user.
Right to interpret and copyright of this manual are preserved.
Bottom View
Mounting
Bracket
6. MONITOR Button
7. 5 Inch TFT-LCD (Touch Screen)
8. LED for Message
9. LED for In-use
10. Microphone
11. Wiring Terminals
12. Mounting Bracket Hold
- 1 -
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Adon VT693 Series
- Page 1 MONITOR PARTS AND FUNCTIONS Right View Bottom View E N G L I S H IN USE MESG SINGLE FAMILY VIDEO INTERCOM SYSTEM MONITOR UNLOCK VT693 SERIES MONITOR CALL TALK Menu Mounting MENU Buttons Bracket 1. TALK Button 6. MONITOR Button 2.
- Page 2 2. OPERATION INSTRUCTIONS 2.4. Image and volume adjust operation During monitoring or 2.1. Basic functions talking, press any menu When visitor presses the Call Button on the ADJUST button Outdoor Station, the monitor rings, at the same MENU will be displayed. time, the screen displays the visitor image, and To move to the last/next Backlight LED will flash slowly in blue.
- Page 3 UNLOCK TIME item is to adjust unlock timing, according to different locks. 4. SYSTEM WIRING INFORMATION item will display hardware/software version, and power supply voltage. 4.1 Terminals and descriptions as below: Press to execute RESTORE FACTORY SET to the Monitor, or press to exit.
- Page 4 4.3 Wiring Diagram of Extended Monitors (1 Door Station to N Monitors) 5. SPECIFICATIONS Power supply for indoor monitor: DC 15~18V (supplied by Adaptor) Power supply for Door Camera: DC 10~12V (Supplied by Indoor Monitor) Power consumption: Standby 0.5W; Working status 15W (for kits) Display screen: 5 Inch TFT-LCD ( 220,000 pixels ) Display Resolutions:...
Need help?
Do you have a question about the VT693 Series and is the answer not in the manual?
Questions and answers