Subscribe to Our Youtube Channel
Related Manuals for Avtech AVH0401
Summary of Contents for Avtech AVH0401
- Page 1 012Z HD VIDEO RECORDER SERIES Quick Start Please read instructions thoroughly before operation and retain it for future reference. Online manual download: www.surveillance-download.com/user/h0401.swf 0401_quick_V0.9...
-
Page 2: Hardware Overview
HARDWARE OVERVIEW 1. HARDWARE OVERVIEW 1.1 Front Panel Note: The functions on the front panel and rear panel may vary, depending on the mode you have. 1) LED indicators Alarm An alarm event occurs. Internet The device is connected to Internet. Record Recording is on. -
Page 3: Camera Ip Configurations By Lan
CONNECTION 2. CONNECTION 2.1 Camera IP Configurations by LAN Auto mode is to simplify the complicated network settings within three minutes. The connection mode of the LAN port is “AUTO” by default. This mode is suitable when the LAN port of the device is connected to a hub. Note: SETTING Path: ADVANCED CONFIG) ... - Page 4 CONNECTION The device will automatically configure the IP address of a camera connected by LAN if: The connected IP camera is our brand’s IP camera. Reset the IP camera to default value (the default IP configuration method of the camera is “DHCP”). ...
-
Page 5: Manual Connection Setup
“URI” to enter the address of the camera, and enter its port number. There are four protocol types available in the drop down list as follows: “AVTECH”, “ONVIF”, “RTSP OVER HTTP”, and “RTSP OVER UDP”. If you are using AVTECH IP cameras, please select “AVTECH”; otherwise, choose the protocols your cameras support. -
Page 6: User Interface
USER INTERFACE 3. USER INTERFACE 3.1 Local 3.1.1 Device Status Key lock Key unlock Channel lock Channel unlock USB flash drive / device connected No USB device connected Timer record on Timer record off Overwrite on Overwrite off Sequence mode on Sequence mode off PTZ mode on PTZ mode off... - Page 7 USER INTERFACE 3.1.4 Main Menu QUICK START Click to set the status display, image settings, and date & time. SYSTEM Click to set the system configurations. EVENT INFORMATION Click to enter the event search menu. Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, and ADVANCED CONFIG RECORD.
Need help?
Do you have a question about the AVH0401 and is the answer not in the manual?
Questions and answers