Advertisement
Quick Links
Advertisement
Summary of Contents for Herma LP Morgan POP
- Page 1 LP morgan POP Screen user manual www.lpmorgan.com.au...
-
Page 2: Notes And Cautions
© 2002-2006 Herma Technologies. All rights reserved. Reproduction in any manner whatsoever without permission of Herma Technologies is strictly forbidden. Trademarks used in this text: Herma, the Herma Logo, LP Morgan and LP Morgan logo are registered trademarks of Herma Technologies. - Page 3 Unpacking the Pop Screen Supplied Depending on the size of the screen chosen and the confi guration you have chosen to mount your screen, you should have a selection of the components shown below: 2 x 2m Cable with top 2 x 2m Cable with side grip suspension kit grip suspension kit...
- Page 4 Installation: Top Grip Kit Detail B Fig 1: Top Grip Assembly Boss Fig 2: Top Grip Hanging Kit detail Assembly to ceiling 1. Position universal grips to POP Screen (See fig 1. and Detail-A) universal 2. A-1 to secure wire; then A-2 to secure screen. grip 3.
- Page 5 Installation: Side Grip Kit Fig. 4a: Fig 4: Side Grip Assembly (Detail A) Detail B 2. Secure wire 1. Secure to screen Fig 5: Side Grip Hanging Kit Assembly detail (Detail B) Detail A boss 1. Attach universal grip to POP Screen (See Fig 4a, step 1) using 2mm allen key (supplied) to tighten M4 grub screw.
- Page 6 Installation: Stabilising Bars 1. Remove plastic caps on both ends of top and bottom stabilising bars and remove clear plastic slide out screen grips (see fig. 6a) 2. Attach plastic grips to top and bottom edges of POP Screen. Make sure they are securely fastened.
- Page 7 Installation: Framed Screens Frame Assembly: • Note: If your screen has been pre-assembled, proceed to page 9. 1. Place two slide nuts into channel of frame section which is intended to be directly above top edge of image. 2. With frame pieces overturned, place corner bracket on corner bracket plate and slide both into channel as far as possible as shown in fi...
- Page 8 Installation: Framed Screens Screen Assembly: 1. Place the frame face up on a flat and stable surface. 2. Open the frame covers (located along the inner edge of the frame). To do this, reach inside of inner edge of frame and pull frame covers toward outer edge of frame.
- Page 9 Installation: Framed Screens Hanging Attachments and Confi guration: 1. Determining appropriate spacing between hanging cables, secure top grip kits to ceiling. See page 4 of this instruction manual on details of how to do this. 2. Secure frame tabs to frame with M6 bolt passing through larger hole of frame tab to slide nut inside of frame channel.
-
Page 10: Maintenance And Troubleshooting
Maintenance and troubleshooting Cleaning instructions: The screen surface on your Pop Screen is extremely delicate. Special attention to these instructions should be followed when cleaning. 1. A draftsman’s style brush may be used to lightly whisk away any loose dirt or dust particles. -
Page 11: Warranty Information
Customers must fill out the online warranty form, or the warranty card included with the product and post it back to Herma at the reply paid address shown on the back cover in order to qualify for the manufacturer’s warranty. - Page 12 Your LP Morgan Retailer is able to provide information on your product. If we can be of any further help, please contact us. Factory 4a, 6 Albert Street Preston Vic 3072 Phone: +61 3 9480 6233 Fax: +61 3 9480 6533 Email: info@herma.com.au www.lpmorgan.com.au...