Page 1
WE-EF LIGHTING Installation and Maintenance Instructions for Recessed Exterior Downlight DOC110 LED...
Page 2
Recessed Exterior Downlight ø 117 Lamps 6 LED 12W* * Nominal power, for latest data refer to www.we-ef.com ø 4,5 – 10 mm Protection IP66, IK07 max. 2,5 mm Class I, ta 40°C Tools required – Screwdriver with blade 3x1 –...
Installation The product must be installed and maintained by a suitably qualified professional in compliance with latest building/ construction and/or electrical regulations and relevant legislation. Warning: Switch off mains electrical supply prior to installing and connecting the luminaire. Do not open lumi- naire while mains supply is switched on.
Page 4
fig. 1 Maintenance Apart from cleaning the outside of the luminaire, no special maintenance work is necessary. DO NOT USE HIGH PRESSURE CLEANERS High pressure cleaners can exceed the requirements of IP66.
Page 5
fig. 2 WARNING – Risk of injury Hold the springs during removal of the luminaire! fig. 3 Termination box shown for illustrative purposes. Box type may change. Torque Screw Torque max. 2,0 Nm max. 4,0 Nm max. 6,0 Nm max. 15,0 Nm max.
Page 6
Installation Blockout - Proud Version Product ID Type 134-1639 BDO11-I Formwork...
Page 7
Installation Blockout - Flush Version Product ID Type 134-1640 BDO11-III Formwork Cover Do not fix cover before formwork is removed!