Niorfnio Niodesktop TB Series Quick Manual

NIODESKTOP - TB SERIES
FM TRANSMITTER
Audio Volume Adjustment Audio Socket
Up Button Microphone socket
Soundtrack Mode
U Disk Play
FWD
Alarm
REF
Reflected Power
U Disk Outlet
PC Control Power Socket
Imported Electronic
U Disk Player
Stereo Sound
Component
Wind Speed Power Intelligent
Adjustable
Control Alarm
MHz
FWD
REF
On/Off Setting Button
Microphone Volume Adjustment
Working Frequency
MHz
Transmit Power
TNC Antenna Female seat
Cooling Fan
Precautions For Use
●There is high pressure inside the machine,maintenance can only be operated by professional
and technical person.
●Please put the machine in a cool dr y and ventilated environment for use,the ambient
temperature should not be higher than 35 degree centigrades.
●After antenna installed,there should be 5 meters above from the ground and wall spacing as
PC Control
standard installation environment.
●When install the feed tube,be sure to tie the feed tube to the mounting rod with a tie to prevent
the feed tube from pulling loose on the connector.
●Please do not turn on the machine without connecting the antenna.
●Please do not touch the antenna after machine is power on.
●Please do not use this machine in explosive antospheres(eg gas stations, gas,steam,etc.).
●Please comply with local radio regulations.
Function and Parameter setting
Power On/Off
When the machine is connected to power, then it starts.
In working condition, long press
In standby mode, long press
Frequency Adjustment
Down Button
In working condition, short press
corner flashes, press
Short press 【
Long press 【
Power Adjustment
Short press 【
【 】 to adjust the power ; Short press
displayed as reflected power.
PS:
The 6-watt power shows 0.75 watts per cell, with a minimum of 0 cells and a maximum of 8
cells.
The 15-watt power shows 1.9 watts per cell, with a minimum of 0 cells and a maximum of 8
cells.
Soundtrack Adjustment
In the working state, short press
flashing, press
【 】 is mono;
Amplifier Temperature
In working condition, short press
the current temperature of the amplifier module.
Audio / Microphone Volume Adjustment
Turn the audio knob / microphone knob clockwise to increase the volume;
turn counterclockwise to decrease the volume.
key, the machine enters standby mode.
key, the machine goes into working condition.
【 】 button , when the
【 】 or 【 】button to adjust the frequency.
】 or 【 】button , frequency steps by 100K;
】 or 【 】 button,frequency continuously steps by 100K.
】 button, when the 【FWD】 icon on the screen is flashing, press
【 】 or 【 】 button Decrement;
【 】 button , when the
【 】 or 【 】button to adjust the channel mode;
【 】 When the stereo channel.
【 】 button, when the
【 MHZ】 icon in the lower right
【 】 or
【REF】 icon is
【 】 icon of screen power icon is
【 】 icon is displayed, it is