Table of Contents
Advertisement
You will see the following screen if you insert the memory card correctly. Make sure you have at least one
picture stored on the memory card. The frame will not function properly without a stored picture.
Please select the memory card, press ENTER button from the unit or remote control to enter the following
screen. Notice: If no built-in memory in DPF, the [Please insert card!] icon will not be displayed!
Viewing Photo
1.
You can use either the remote control or the on-board buttons to control the Digital Photo Frame.
2.
Remove the plastic battery insulator (if any) on the bottom of the remote control and make sure
the remote control has a battery installed. See "Installing and replacing battery" section if you need a
new battery.
3.
Use the remote control to highlight and select the Photo folder (Use the direction keys Right, Left on
the remote control to navigate and press Enter to select).
4.
Highlight a picture and press Enter to view the picture.
5.
Press
button to view the picture sequential.
6.
When you press "SLIDE SHOW" button, it will start the slide show and also play the MP3 files in the
background.
10.4 INCH / 15 INCH DIGITAL PHOTO FRAME
PHOTO
Enter the photo play mode directly
MUSIC
Enter the music play mode directly
VIDEO
Enter the Video play mode directly
FILE
Enter the file play mode directly
[3]
Advertisement
Table of Contents
