Page 3
Before ordering products, please learn about the product performance from the distributors to see if it is in line with your needs. NORCO is a registered trademark of Shenzhen NORCO Intelligent Technology CO., LTD. The ownership of other trademarks involved in this manual is owned by its respective owners.
Page 4
Safety Instructions 1. Please read the product manual carefully before using this product. 2 . Put all the unused or uninstalled boards or electronic components in a static dissipative surface or static shielding bag. 3.Always ground yourself to remove any static discharge before touching the board, to place your hands on grounding metal object for a while or wear an anti-static wrist strap at all times.
Page 7
Packing List Thanks for purchasing NORCO products. Please check the accessories as per the packing list when you open its package. If you find any components/parts defected, damaged or lost, please contact your vendor ASAP. ■ PPC-3315C...
PPC-3315C Chapter Two Hardware Function 2.1 External interface indicator diagram 2.1.1 PPC-3315C front view 2.1.2 PPC-3315C rear view...
Page 13
PPC-3315C 2.1.3 PPC-3315C port Power interface HDMI port LAN port USB1-6 port COM1-4 port Reset CVBS camera interface Power amplifier and 485 ports Isolated GPIO interface MIC port...
PPC-3315C Chapter Three Hardware Installation Before installing the computer accessories Following the instructions below will help to prevent your computer from being damaged, and also ensuring your personal safety. 1:Please make sure your computer is disconnected from the power supply.
PPC-3315C JP1 (download setting) Close download Open normal J12(LVDS POWER Selection) +3.3V 1-3,2-4 3-5,4-6 J13 (+12V power output and motherboard ground output selection) J14. Pin A4 connect to +12V power J14. Pin A3 connect to motherboard ground Note:Avoid connecting pin1 and pin 2 of J13, which will cause short circuit of power supply!...
PPC-3315C 3.2.1 Serial Port(COM1_3,COM4_5) Provide 4x standard RS232 serial ports COM1_3(Corresponding to the screen printing on the complete machine COM1&COM2) ,COM4_5 (Corresponding to the screen printing on the complete machine COM3&COM4), in which COM1_3 port have RTS, CTS function,COM4_5 do not have RTS,CTS function.
PPC-3315C SATA SATA signal port SATA: Signal Names SATA power interface J16: Signal Names +3.3V 3.2.3 USB Port(USB1-3,USB4-6,J7) Provide 8xUSB 2.0 port,5x standard USB2.0 port(USB4 can choose pin J8,USB5 can be used as WIFI),1x OTG function USB2.0 standard port(can choose pin J6) ,1 x USB2.0...
Page 20
PPC-3315C J6、J7、J8 USB1-3 USB4-6 Signal Names USB DATA+ USB DATA- J6 (optional) Signal Names OTG DATA+ OTG DATA- J8 (optional) Signal Names USB DATA-...
PPC-3315C USB DATA+ 3.2.4 Ethernet Port(LAN) Provide 1xPHY port chip, model: AR8033, Yellow for data transmission, Green for network connection status. RJ45 LAN LED state description: LILED(Green) Function ACTLED Function 100/1000M link FLASH Data transmission 10M link or closed Transmission Stopped 3.2.5 Audio Port(J14, J18)...
Page 22
PPC-3315C J18: Signal Names Signal Names Line in-L Line in-R HeadPh-R HeadPh-L J14(Amplifier out): Signal Names AMP_L+ AMP_L- AMP_R- AMP_R+ GND (optional) +VIN(+12V optional) RCA socket with standard external camera BNC socket and microphone...
PPC-3315C LVDS1_SDA LVDS0_SDA EIM_CS1 EIM_D23 3.2.7 Power Interface( PWR、PWR1 ) PWR1 PWR: Signal Names +VIN PWR1: Signal Names +VIN 3.2.8 Power Supply and System Indicator (LED2) : When the system is powered on, the power indicator light is green when the motherboard is powered on normally;...
Page 26
PPC-3315C LED2 3.2.9 Isolated GPI and GPO Port(J15): J15: Signal Names Signal Names GP_IN1 GP_O1 GP_IN2 GP_O2 GP_IN3 GP_O3 VDIO(+5V) GND_DIO...
PPC-3315C 3.2.10 485 Port(J14): J14: Signal Names 485DATA+ 485DATA- The mapping relationship of serial port 485 is as follows: 485 serial port correspondence 485 serial port /dev/ttymxc1 3.2.11 Four wire touch screen interface(J4): Motherboard provide 1x four wire resistance touch J4(optional)...
PPC-3315C J10: Signal Names Signal Names +3.3V SD1_DAT0 SD1_CMD SD1_DAT1 SD1_CLK SD1_DAT2 EIM_CS0 NANDF_D3 GPIO9 Signal Names Signal Names +3.3V EIM_EB2 KEY_COL2 EIM_D16 GPIO17 EIM_D18 GPIO18 EIM_D17 SD2_CMD 3.2.13 CAN Port(J5) : Motherboard provide 2x CAN BUS port(optional).
PPC-3315C Signal Names Signal Names CAN1_H CAN2_H CAN1_L CAN2_L 3.2.14 Front Panel Interface (JFP、RSTSW): JFP_RST is reboot function,the restart of low pulse needs software cooperation (it can also be realized by RSTSW key). JFP_PWRSW is power ON/OFF function; To realize power ON/OFF with low pulse, software is needed.
PPC-3315C 3.2.15 Fan Interface(SYS_FAN) SYS_FAN SYS_FAN: Signal Names VCC_FAN(+12V) 3.2.16 MINI PCIe Port Motherboard provide 1x MINI PCIe slot,users can expand Mini PCIe devices according to their own needs. If you use mini PCIe wireless network card, you can display the status of...
PPC-3315C Chapter Four Software Function 4.1 Android System 4.1.1 Display Support lvds lcd and HDMI independent output Support lvds lcd and HDMI copy output at the same time Support lvds lcd and HDMI expansion output at the same time lvds lcd, need to customize the driver according to the customer's actual use of LCD screen.
PPC-3315C 4.1.9 Ethernet Please refer to the Android interface for specific operations. 4.1.10 Sound Card Support local sound card and HDMI dual sound card. Local sound card supports a pair of independent headphone, and MIC. 4.1.11 Camera Support USB camera and CVBS port camera.
PPC-3315C Appendix Appendix 1:Glossary BUS is a channel for different devices to exchange data in computer system. It is hardware circuit. BUS here refers to partial lines inside CPU and the main components of system memory. Chipset Chipset is an integrated set of chips for executing one or more related functions。Here it refers to a system level chipset structured by South bridge &...
Page 37
PPC-3315C DRAM Dynamic Random Access Memory. It’s a general type of memory for regular computer which usually store 1 bit with a transistor and a capacitance. With the development of the technology, more and more types of DRAM with different specifications exist in computer applications.