Grizzly T31616 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
This variable-speed air mover offers two built-in
outlets to connect multiple units, and sits in four
different positions for ease of placement.
Specifications
• Motor ......................... 120V, 1-Ph, 60 Hz, 1A
• Maximum Total Current Rating ............... 15A
• Speed ................................... 900-1500 RPM
• Maximum Airflow ........................... 300 CFM
• To avoid electric shock, do not handle
plug or machine with wet hands and do
not expose to rain or place directly in wet
area.
• Disconnect power before servicing,
cleaning, or when machine is not in use.
• Only plug power cord into a grounded
outlet.
• Keep hair, loose clothing away from fan.
• Do not modify machine in any way.
• Do not use if cord/plug becomes dam-
aged—only replace with Ground Fault
Circuit Interrupter plug (GFCI).
• Do not run cord under carpeting or where
it may be tripped over.
• Not meant for outdoor use.
• To avoid fire, do not use in area with
flammable or combustible liquids/fumes.
• Prevent unauthorized use by children or
untrained users.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © SEPTEMBER, 2019 BY GRIZZLY INDUSTRIAL, INC.
#CS20628 PRINTED IN CHINA
MODEL T31616
VARIABLE-SPEED
AIR MOVER
INSTRUCTIONS
Operation
1. Place air mover at desired position with air
inlets and outlet unobstructed and on a level
surface (see Figure 1).
Air Outlet
Figure 1. Air circulation.
2. Make sure variable-speed dial is OFF (see
Figure 2), then plug into a GFCI-protected
outlet.
120 VAC Outlet
(1 of 2)
Figure 2. Power components.
Air Inlet
(1 of 2)
Variable-Speed
Dial
Power
Cord
V1.09.19