Related Manuals for nomad PWR FLO NPF07 Series
Summary of Contents for nomad PWR FLO NPF07 Series
- Page 1 O P E R A T I O N M A N U A L NPF07 .25” METALLIC PUMP PWR-FLO AIR DISTRIBUTION SYSTEM AIR-OPERATED • DOUBLE DIAPHRAGM • PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company...
-
Page 2: Cautions - Read First
CAUTIONS - READ FIRST CAUTION: CAUTION: Do not apply compressed air to the Do not exceed 79°C (174°F) air inlet exhaust port – pump will not function. temperature. CAUTION: CAUTION: Do not over-lubricate air supply – excess Pumps should be thoroughly flushed lubrication will reduce pump performance. -
Page 3: Pump Designation System
Valve Seats 11 Fittings 12 Connections 13 ATEX 4 5 6 1 Air Distribution System 2 Liquid Port Size 3 Wetted Parts 7,8 Diaphragms & Valve Balls 9 Valve Seats 11 Fittings 12 Connections 13 ATEX Nomad 07mm/.25” Aluminum Buna - N/ Nitrile Aluminum Clamped Trans-Flo 15mm/.5”... -
Page 4: How It Works - Pump
How It Works - Pump The NOMAD diaphragm pump is an air-operated, positive displacement, self-priming pump. These drawings show flow pattern through the pump upon its initial stroke. It is assumed the pump has no fluid in it prior to its initial stroke. -
Page 5: Dimensional Drawings
Dimensional Drawings PF07 METAL... - Page 6 Performance PF07 METAL RUBBER-FITTED PF07 METAL PTFE-FITTED Height ........148 mm (5.8") Width ........165 mm (6.5") Depth ........114 mm (4.5") Ship Weight ....Aluminum 1.8 kg (4 lbs.) Stainless Steel 4.0 kg (8.9 lbs.) Air Inlet ........3.2 mm ( ⁄...
-
Page 7: Suggested Installation
• Do not exceed 8.6 BAR (125 PSIG) ALL NOMAD PUMPS ARE CAPABLE OF PASSING • For best results, use 5 micron air filter SOLIDS. A STRAINER SHOULD BE USED ON THE PUMP INTAKE TO ENSURE THAT THE PUMP’S RATED SOLIDS CAPACITY IS NOT... - Page 8 Suggested Installation This illustration is a generic representation of an air-operated double-diaphragm pump. NOTE: in the air supply line. A properly functioning valve will stop the air In the event of a power failure, the shut off valve should be supply to the pump, therefore stopping output.
-
Page 9: Suggested Operation & Maintenance
Suggested Operation & Maintenance Troubleshooting Pump will not run or runs slowly. Pump air valve freezes. 1. Ensure that the air inlet pressure is at least 0.4 1. Check for excessive moisture in compressed Bar (5 psig) above start up pressure and that the air. -
Page 10: Exploded View & Parts Listing
Exploded View & Parts Listing 1/4” Aluminum PWR-FLO Part Description Qty. Aluminum Housing (Center Section) N00-3150-01-700 Air Valve Body Assy N00-2000-01-700 End Cap N00-2300-01-700 Spool N00-2250-99-700 O-Ring Small 179 40 01 CFT Ring Small 179 36 01 O-Ring Big 179 40 02 CFT Ring Big 179 36 02 End Cap O-Ring... - Page 11 Exploded View & Parts Listing NPF07 Metal Rubber/TPE-Fitted 1/4” Stainless Steel PWR-FLO...
- Page 12 Exploded View & Parts Listing NPF07 Metal Rubber/TPE-Fitted Part Description Qty. Aluminum Stainless Steel Air Valve Assembly N00-2000-20-700 N00-2000-20-700 Air Valve End cap N00-2300-20-700 N00-2300-20-700 End Cap ‘o’ Ring N00-2390-52-700 N00-2390-52-700 Muffler Element N00-3240-26-700 N00-3240-26-700 Air Valve Bolt N00-6000-03-700 N00-6000-03-700 Air Valve Gasket N00-2600-52-700 N00-2600-52-700...
- Page 13 Exploded View & Parts Listing PF07 Metal PTFE-Fitted 1/4” Stainless Steel PWR-FLO...
- Page 14 Exploded View & Parts Listing NPF07 Metal PTFE-Fitted Part Description Qty. Aluminum Stainless Steel Air Valve Assembly N00-2000-20-700 N00-2000-20-700 Air Valve End cap N00-2300-20-700 N00-2300-20-700 End Cap ‘o’ Ring N00-2390-52-700 N00-2390-52-700 Muffler Element N00-2340-26-700 N00-2340-26-700 Air Valve Bolt N00-6000-03-700 N00-6000-03-700 Air Valve Gasket N00-2600-52-700 N00-2600-52-700...
- Page 15 A JDA Global Company 1645 W. Park Ave., Suite 200 Redlands, CA USA 92373 (909) 798-9532...